@@ -700,6 +701,100 @@ test_sctp_connect_v4() {
return 0
}
+# sctp_connect_v6 test
+# - sctp(dst=4443) matches client-to-server INIT
+# - sctp(src=4443) matches server-to-client INIT-ACK
+# - icmpv6 NS/NA flows forward neighbour discovery
+# - remove flows and verify connection fails, reinstall and recover
+test_sctp_connect_v6() {
+ local t="test_sctp_connect_v6"
+ local v6="eth_type(0x86dd),ipv6(proto=132)"
+ local payload="SCTP6_DATA_OK"
+ local rxfile="${ovs_base}/${t}/sctp-rx.txt"
+
+ modprobe -q sctp 2>/dev/null || return "$ksft_skip"
+ socat -V 2>&1 | grep -q "define WITH_SCTP" || return "$ksft_skip"
+ [ -e /proc/sys/net/ipv6 ] || return "$ksft_skip"
+
+ sbx_add "$t" || return $?
+ ovs_add_dp "$t" sctp6 || return 1
+
+ info "create namespaces"
+ for ns in client server; do
+ ovs_add_netns_and_veths "$t" "sctp6" "$ns" \
+ "${ns:0:1}0" "${ns:0:1}1" || return 1
+ done
+
+ ip netns exec client ip addr add fd00::1/64 dev c1 nodad
+ ip netns exec client ip link set c1 up
+ ip netns exec server ip addr add fd00::2/64 dev s1 nodad
+ ip netns exec server ip link set s1 up
+
+ # NS/NA forwarding
+ ovs_add_flow "$t" sctp6 \
+ 'in_port(1),eth(),eth_type(0x86dd),ipv6(proto=58),icmpv6()' \
+ '2' || return 1
+ ovs_add_flow "$t" sctp6 \
+ 'in_port(2),eth(),eth_type(0x86dd),ipv6(proto=58),icmpv6()' \
+ '1' || return 1
+
+ # SCTP port matching: dst for request, src for reply
+ ovs_add_flow "$t" sctp6 \
+ "in_port(1),eth(),$v6,sctp(dst=4443)" \
+ '2' || return 1
+ ovs_add_flow "$t" sctp6 \
+ "in_port(2),eth(),$v6,sctp(src=4443)" \
+ '1' || return 1
+
+ ovs_netns_spawn_daemon "$t" "server" \
+ socat -u -t 1 SCTP6-LISTEN:4443,fork \
+ OPEN:"$rxfile",creat,append
+ ovs_wait sctp_eps_has server 4443 || return 1
+
+ info "verify SCTP association with port-keyed flows"
+ ovs_sbx "$t" ip netns exec client \
+ timeout 3 socat -u STDIN "SCTP6-CONNECT:[fd00::2]:4443" </dev/null \
+ || return 1
+
+ info "verify SCTP DATA chunk crosses the datapath"
+ ovs_sbx "$t" ip netns exec client \
+ timeout 3 socat -u STDIN "SCTP6-CONNECT:[fd00::2]:4443" \
+ <<< "$payload" || return 1
+ ovs_wait grep -q "$payload" "$rxfile" \
+ || { info "server did not receive SCTP DATA payload"
+ return 1; }
+
+ ovs_del_flows "$t" sctp6
+
+ info "verify connection fails without flows"
+ ovs_add_flow "$t" sctp6 \
+ 'in_port(1),eth(),eth_type(0x86dd),ipv6(proto=58),icmpv6()' \
+ '2' || return 1
+ ovs_add_flow "$t" sctp6 \
+ 'in_port(2),eth(),eth_type(0x86dd),ipv6(proto=58),icmpv6()' \
+ '1' || return 1
+
+ ovs_sbx "$t" ip netns exec client \
+ timeout 3 socat -u STDIN "SCTP6-CONNECT:[fd00::2]:4443" </dev/null \
+ >/dev/null 2>&1 \
+ && { info "connection should fail without flows"
+ return 1; }
+
+ info "reinstall flows and verify recovery"
+ ovs_add_flow "$t" sctp6 \
+ "in_port(1),eth(),$v6,sctp(dst=4443)" \
+ '2' || return 1
+ ovs_add_flow "$t" sctp6 \
+ "in_port(2),eth(),$v6,sctp(src=4443)" \
+ '1' || return 1
+
+ ovs_sbx "$t" ip netns exec client \
+ timeout 3 socat -u STDIN "SCTP6-CONNECT:[fd00::2]:4443" </dev/null \
+ || return 1
+
+ return 0
+}
+
# psample test
# - use psample to observe packets
test_psample() {