Re: [PATCH net v3] net: pin protocol module before inet socket allocation

Thank you for your contribution! Sashiko AI review found 1 potential
issue(s) to consider:

Critical: 0 · High: 1 · Medium: 0 · Low: 0

- [High] The newly added `module_is_coming(answer_owner)` rejection in
  `inet_create()` (net/ipv4/af_inet.c) and `inet6_create()`…

--

net: pin protocol module before inet socket allocation

The patch caches answer->prot and its owner module while still under
rcu_read_lock() in inet_create() and inet6_create(), rejects an owner that
is in MODULE_STATE_COMING, and otherwise pins the module with
try_module_get() before dropping RCU. The temporary reference is dropped
after sk_alloc() via a new out_module_put label.

Link: https://lore.kernel.org/netdev/20260825172349.232794-1-nicoyip.dev@gmail.com/ (local) [v2]
Link: https://lore.kernel.org/netdev/20260823171311.3857087-1-nicoyip.dev@gmail.com/ (local) [v1]

[ ... ]

[Severity: High]
Can this module_is_coming() rejection break modular protocols that create
a socket for their own protosw from their own module init path?

module_is_coming() is true for the whole duration of the owner module's
init function:

include/linux/module.h:
static inline bool module_is_coming(struct module *mod)
{
        return mod->state == MODULE_STATE_COMING;
}

kernel/module/main.c sets MODULE_STATE_COMING before calling
do_init_module(), and only sets MODULE_STATE_LIVE after mod->init()
returns.

SCTP (CONFIG_IP_SCTP=m) looks like it hits this. sctp_init() publishes the
protosws first and then calls register_pernet_subsys(), which runs the
.init hook immediately for existing net namespaces:

net/sctp/protocol.c:sctp_init() {
	...
	status = sctp_v4_protosw_init();
	...
	status = sctp_v6_protosw_init();
	...
	status = register_pernet_subsys(&sctp_ctrlsock_ops);
	if (status)
		goto err_register_ctrlsock;
	...
}

so sctp_ctrlsock_init() -> sctp_ctl_sock_init() runs inside sctp_init(),
while sctp.ko is still MODULE_STATE_COMING:

net/sctp/protocol.c:sctp_ctl_sock_init() {
	...
	err = inet_ctl_sock_create(&net->sctp.ctl_sock, family,
				   SOCK_SEQPACKET, IPPROTO_SCTP, net);

	/* If IPv6 socket could not be created, try the IPv4 socket */
	if (err < 0 && family == PF_INET6)
		err = inet_ctl_sock_create(&net->sctp.ctl_sock, AF_INET,
					   SOCK_SEQPACKET, IPPROTO_SCTP,
					   net);
	...
}

inet_ctl_sock_create() goes through sock_create_kern() -> __sock_create()
-> inet6_create()/inet_create(), and the new check does not exempt kern
sockets. sctp_prot.owner and sctpv6_prot.owner are THIS_MODULE, which is
non-NULL for a modular build, so both attempts would return
-EPROTONOSUPPORT, sctp_ctrlsock_init() would print "Failed to initialize
the SCTP control sock", register_pernet_subsys() would propagate the
error, and sctp_init() would unwind. Would modprobe sctp then fail
outright?

There is a note about exactly this pattern above module_is_coming():

include/linux/module.h:
/* FIXME: It'd be nice to isolate modules during init, too, so they
   aren't used before they (may) fail.  But presently too much code
   (IDE & SCSI) require entry into the module during init.*/

Separately, for tasks that are not the loading task: once a modular
protocol has published its protosw but has not finished init, a concurrent
socket() finds the protosw, so the existing try_loading_module /
request_module() retry loop is not entered (the lookup succeeded), and the
caller gets -EPROTONOSUPPORT for what is a transient state. Should that
window either succeed or wait rather than returning a user-visible error?

One correction to the reasoning behind this concern: the ipv6 module case
does not apply in this tree. menuconfig IPV6 in net/ipv6/Kconfig is bool
and inet6_init is registered with device_initcall(), so rawv6_prot.owner is
NULL and the answer_owner && test short-circuits. The inet6_create() site
below is still reached by SCTP's first PF_INET6 control-socket attempt,
whose proto owner is the still-coming sctp module.

[ ... ]

[Severity: High]
Same question here for the IPv6 path: this is the site reached by
sctp_ctl_sock_init()'s first attempt, inet_ctl_sock_create(..., PF_INET6,
SOCK_SEQPACKET, IPPROTO_SCTP, net), where sctpv6_prot.owner is the sctp
module in MODULE_STATE_COMING. Does that attempt now return
-EPROTONOSUPPORT before the AF_INET fallback, which then fails for the same
reason?

[ ... ]

-- 
Sashiko AI review · https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260904111514.584264-1-nicoyip.dev%40gmail.com