[PATCH net-next v3 10/10] net: dec: fix typos in comments
From: Hemanth Selam <hidden>
Date: 2026-09-08 05:27:49
Also in:
linux-arm-kernel, linux-kselftest, lkml
Subsystem:
networking drivers, the rest, tulip network drivers · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Fix misspellings in comments, found with scripts/checkpatch.pl using the misspelling list in scripts/spelling.txt. Comments only, no code changes. Assisted-by: Cursor:claude-opus-5 Signed-off-by: Hemanth Selam <redacted> --- drivers/net/ethernet/dec/tulip/de2104x.c | 2 +- drivers/net/ethernet/dec/tulip/interrupt.c | 4 ++-- drivers/net/ethernet/dec/tulip/media.c | 2 +- drivers/net/ethernet/dec/tulip/tulip.h | 4 ++-- drivers/net/ethernet/dec/tulip/winbond-840.c | 2 +- 5 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c
index f38a10c79907..fa52e099409c 100644
--- a/drivers/net/ethernet/dec/tulip/de2104x.c
+++ b/drivers/net/ethernet/dec/tulip/de2104x.c@@ -373,7 +373,7 @@ static void de_rx_err_acct (struct de_private *de, unsigned rx_tail, rx_tail, status, len); if ((status & 0x38000300) != 0x0300) { - /* Ingore earlier buffers. */ + /* Ignore earlier buffers. */ if ((status & 0xffff) != 0x7fff) { netif_warn(de, rx_err, de->dev, "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
diff --git a/drivers/net/ethernet/dec/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c
index 0a12cb9b3ba7..8c02771b28e4 100644
--- a/drivers/net/ethernet/dec/tulip/interrupt.c
+++ b/drivers/net/ethernet/dec/tulip/interrupt.c@@ -177,7 +177,7 @@ int tulip_poll(struct napi_struct *napi, int budget) pkt_len > 1518) { if ((status & (RxLengthOver2047 | RxWholePkt)) != RxWholePkt) { - /* Ingore earlier buffers. */ + /* Ignore earlier buffers. */ if ((status & 0xffff) != 0x7fff) { if (tulip_debug > 1) dev_warn(&dev->dev,
@@ -408,7 +408,7 @@ static int tulip_rx(struct net_device *dev) pkt_len > 1518) { if ((status & (RxLengthOver2047 | RxWholePkt)) != RxWholePkt) { - /* Ingore earlier buffers. */ + /* Ignore earlier buffers. */ if ((status & 0xffff) != 0x7fff) { if (tulip_debug > 1) netdev_warn(dev,
diff --git a/drivers/net/ethernet/dec/tulip/media.c b/drivers/net/ethernet/dec/tulip/media.c
index 55d6fc99f40b..0c9694d2b38a 100644
--- a/drivers/net/ethernet/dec/tulip/media.c
+++ b/drivers/net/ethernet/dec/tulip/media.c@@ -24,7 +24,7 @@ /* Read and write the MII registers using software-generated serial MDIO protocol. It is just different enough from the EEPROM protocol - to not share code. The maxium data clock rate is 2.5 Mhz. */ + to not share code. The maximum data clock rate is 2.5 Mhz. */ #define MDIO_SHIFT_CLK 0x10000 #define MDIO_DATA_WRITE0 0x00000 #define MDIO_DATA_WRITE1 0x20000
diff --git a/drivers/net/ethernet/dec/tulip/tulip.h b/drivers/net/ethernet/dec/tulip/tulip.h
index 5e010e1fa6f7..e39e5c78d4cc 100644
--- a/drivers/net/ethernet/dec/tulip/tulip.h
+++ b/drivers/net/ethernet/dec/tulip/tulip.h@@ -250,7 +250,7 @@ enum t21143_csr6_bits { csr6_ttm = (1<<22), /* Transmit Threshold Mode, set for 10baseT, 0 for 100BaseTX */ csr6_sf = (1<<21), /* Store and forward. If set ignores TR bits */ csr6_hbd = (1<<19), /* Heart beat disable. Disables SQE function in 10baseT */ - csr6_ps = (1<<18), /* Port Select. 0 (defualt) = 10baseT, 1 = 100baseTX: can't be set */ + csr6_ps = (1<<18), /* Port Select. 0 (default) = 10baseT, 1 = 100baseTX: can't be set */ csr6_ca = (1<<17), /* Collision Offset Enable. If set uses special algorithm in low collision situations */ csr6_trh = (1<<15), /* Transmit Threshold high bit */ csr6_trl = (1<<14), /* Transmit Threshold low bit */
@@ -274,7 +274,7 @@ enum t21143_csr6_bits { csr6_om_int_loop = (1<<10), /* internal (FIFO) loopback flag */ csr6_om_ext_loop = (1<<11), /* external (PMD) loopback flag */ /* set both and you get (PHY) loopback */ - csr6_fd = (1<<9), /* Full duplex mode, disables hearbeat, no loopback */ + csr6_fd = (1<<9), /* Full duplex mode, disables heartbeat, no loopback */ csr6_pm = (1<<7), /* Pass All Multicast */ csr6_pr = (1<<6), /* Promiscuous mode */ csr6_sb = (1<<5), /* Start(1)/Stop(0) backoff counter */
diff --git a/drivers/net/ethernet/dec/tulip/winbond-840.c b/drivers/net/ethernet/dec/tulip/winbond-840.c
index a5581f1d0141..be9199f55a8a 100644
--- a/drivers/net/ethernet/dec/tulip/winbond-840.c
+++ b/drivers/net/ethernet/dec/tulip/winbond-840.c@@ -1188,7 +1188,7 @@ static int netdev_rx(struct net_device *dev) break; if ((status & 0x38008300) != 0x0300) { if ((status & 0x38000300) != 0x0300) { - /* Ingore earlier buffers. */ + /* Ignore earlier buffers. */ if ((status & 0xffff) != 0x7fff) { dev_warn(&dev->dev, "Oversized Ethernet frame spanned multiple buffers, entry %#x status %04x!\n",
--
2.48.1