[PATCH net 2/3] net: dsa: lantiq_gswip: handle SPEED_2500 in gswip_port_set_speed()

The mxl-gsw1xx driver advertises 2500BASE-X on its SGMII port (via
supports_2500m and gsw1xx_phylink_get_caps()), but the shared
gswip_port_set_speed() has no SPEED_2500 case: at 2.5G every field keeps
its initializer, so mdio_phy = 0 pins the MDIO speed override to 10 Mbps
and no data passes.

At the MAC/MDIO level 2500BASE-X is identical to 1 Gbps (same wide GMII
datapath, same speed override); the rate itself is set in the PCS and
SerDes, not here. This matches the boot loader's PHY_ADDR_4 = 0x32A4 for
the 2.5G strap ("1 Gbps or above"), whose SPEED field is
GSWIP_MDIO_PHY_SPEED_G1 (the field has no encoding above G1). Share the
SPEED_1000 arm via a stacked case label. Its mii_cfg value is a no-op
for 2.5G: gswip_mii_mask_cfg() writes it only for the RGMII port
(mii_cfg[SGMII port] == -1), which cannot reach 2.5G anyway.

Fixes: 22335939ec90 ("net: dsa: add driver for MaxLinear GSW1xx switch family")
Signed-off-by: Jan Havran (Advantech Czech) <redacted>
---
 drivers/net/dsa/lantiq/lantiq_gswip_common.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/dsa/lantiq/lantiq_gswip_common.c b/drivers/net/dsa/lantiq/lantiq_gswip_common.c
index 0e8eedf64d3a3..6150dc3ffb641 100644
--- a/drivers/net/dsa/lantiq/lantiq_gswip_common.c
+++ b/drivers/net/dsa/lantiq/lantiq_gswip_common.c

@@ -1339,6 +1339,7 @@ static void gswip_port_set_speed(struct gswip_priv *priv, int port, int speed,
 		break;
 
 	case SPEED_1000:
+	case SPEED_2500:
 		mdio_phy = GSWIP_MDIO_PHY_SPEED_G1;
 
 		mii_cfg = GSWIP_MII_CFG_RATE_M125;

-- 
2.39.5