[PATCH iwl-next v1 06/10] libie, idpf: move hardware irq info struct to libie

@@ -577,40 +577,6 @@ struct idpf_vport_config {
 	     iter = (++__##iter) < &(adapter)->vports[(adapter)->max_vports] ? \
 	     *__##iter : NULL)
 
-/**
- * struct idpf_vec_regs - hardware registers related to vector
- * @dyn_ctl: Dynamic control interrupt register offset
- * @itrn: Interrupt Throttling Rate register offset
- * @itrn_index_spacing: Register spacing between ITR registers of the same
- *			vector
- */
-struct idpf_vec_regs {
-	u32 dyn_ctl;
-	u32 itrn;
-	u32 itrn_index_spacing;
-};
-
-/**
- * struct idpf_hw_vector - single hardware vector info
- * @regs: address of irq registers
- * @idx: hardware vector index
- */
-struct idpf_hw_vector {
-	struct idpf_vec_regs regs;
-	int idx;
-};
-
-/**
- * struct idpf_irq_info - hardware data needed to setup irq
- * @vectors: allocated during initialization store hardware information
- *	     for all vectors that can be used on a whole device
- * @num: amount of vectors stored here
- */
-struct idpf_irq_info {
-	struct idpf_hw_vector *vectors;
-	int num;
-};
-
 /**
  * struct idpf_adapter - Device data struct generated on probe
  * @pdev: PCI device struct given on probe

@@ -685,7 +651,7 @@ struct idpf_adapter {
 	struct msix_entry *rdma_msix_entries;
 	struct libie_irq irq;
 	struct virtchnl2_alloc_vectors *req_vec_chunks;
-	struct idpf_irq_info irq_info;
+	struct libie_irq_info irq_info;
 	struct idpf_q_vector mb_vector;
 	irqreturn_t (*irq_mb_handler)(int irq, void *data);
 

@@ -87,7 +87,7 @@ static void idpf_noirq_intr_reg_init(struct idpf_adapter *adapter,
 static void idpf_intr_reg_init(struct idpf_adapter *adapter,
 			       struct idpf_q_vector *q_vector, u16 idx)
 {
-	struct idpf_hw_vector *v = &adapter->irq_info.vectors[idx];
+	struct libie_hw_vector *v = &adapter->irq_info.vectors[idx];
 	struct idpf_intr_reg *intr = &q_vector->intr_reg;
 	struct libie_mmio_info *mmio;
 	u32 rx_itr, tx_itr;

@@ -86,7 +86,7 @@ static void idpf_vf_noirq_intr_reg_init(struct idpf_adapter *adapter,
 static void idpf_vf_intr_reg_init(struct idpf_adapter *adapter,
 				  struct idpf_q_vector *q_vector, u16 idx)
 {
-	struct idpf_hw_vector *v = &adapter->irq_info.vectors[idx];
+	struct libie_hw_vector *v = &adapter->irq_info.vectors[idx];
 	struct idpf_intr_reg *intr = &q_vector->intr_reg;
 	struct libie_mmio_info *mmio;
 	u32 rx_itr, tx_itr;

@@ -1855,7 +1855,7 @@ idpf_prep_map_unmap_queue_set_vector_msg(u32 vport_id, void *buf,
  */
 static int
 idpf_send_map_unmap_queue_set_vector_msg(const struct idpf_queue_set *qs,
-					 const struct idpf_irq_info *info,
+					 const struct libie_irq_info *info,
 					 bool map)
 {
 	struct virtchnl2_queue_vector *vqv __free(kfree) = NULL;

@@ -2238,14 +2238,14 @@ int idpf_send_add_queues_msg(struct idpf_adapter *adapter,
  *
  * Returns 0 on success, negative on failure.
  */
-static int idpf_create_vectors_info(struct idpf_irq_info *info,
+static int idpf_create_vectors_info(struct libie_irq_info *info,
 				    const struct virtchnl2_get_capabilities *caps,
 				    const struct virtchnl2_alloc_vectors *vectors,
 				    const u16 num_vectors)
 {
 	const struct virtchnl2_vector_chunks *chunks = &vectors->vchunks;
 	int all_vectors = num_vectors + IDPF_MBX_Q_VEC;
-	struct idpf_hw_vector *vector;
+	struct libie_hw_vector *vector;
 	int reg_cnt;
 
 	if (le16_to_cpu(vectors->num_vectors) < num_vectors)

@@ -2266,7 +2266,7 @@ static int idpf_create_vectors_info(struct idpf_irq_info *info,
 	for (int i = 0; i < le16_to_cpu(chunks->num_vchunks); i++) {
 		const struct virtchnl2_vector_chunk *chunk = &chunks->vchunks[i];
 		u32 dyn_spacing, itrn_spacing;
-		struct idpf_vec_regs reg_val;
+		struct libie_vec_regs reg_val;
 		u16 vec_id;
 
 		reg_val.dyn_ctl = le32_to_cpu(chunk->dynctl_reg_start);

@@ -64,6 +64,40 @@ struct libie_irq {
 	struct xarray entries;
 };
 
+/**
+ * struct libie_vec_regs - hardware registers related to vector
+ * @dyn_ctl: Dynamic control interrupt register offset
+ * @itrn: Interrupt Throttling Rate register offset
+ * @itrn_index_spacing: Register spacing between ITR registers of the same
+ *			vector
+ */
+struct libie_vec_regs {
+	u32 dyn_ctl;
+	u32 itrn;
+	u32 itrn_index_spacing;
+};
+
+/**
+ * struct libie_hw_vector - single hardware vector info
+ * @regs: address of irq registers
+ * @idx: hardware vector index
+ */
+struct libie_hw_vector {
+	struct libie_vec_regs regs;
+	int idx;
+};
+
+/**
+ * struct libie_irq_info - hardware data needed to setup irq
+ * @vectors: allocated during initialization store hardware information
+ *	     for all vectors that can be used on a whole device
+ * @num: amount of vectors stored here
+ */
+struct libie_irq_info {
+	struct libie_hw_vector *vectors;
+	int num;
+};
+
 int libie_irq_init(struct libie_irq *irq, struct pci_dev *pdev,
 		   int min, int max);
 void libie_irq_deinit(struct libie_irq *irq);