Thread (3 messages) flat view 3 messages, 3 authors, 5h ago
HOTtoday

[PATCH] net: fix typos in comments

From: Hemanth Selam <hidden>
Date: 2026-09-07 06:43:53
Also in: lkml
Subsystem: ieee 802.15.4 subsystem, networking drivers, networking [general], the rest · Maintainers: Alexander Aring, Stefan Schmidt, Miquel Raynal, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt.  Only touches comments, no code
changes.

Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <redacted>
---
 drivers/net/ieee802154/at86rf230.c | 2 +-
 net/mac802154/iface.c              | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 6156cf379916..f1adca942e3d 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -1370,7 +1370,7 @@ static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim)
 	 *	  but this is different on each board setup. You need to fine
 	 *	  tuning this value via CTRIM.
 	 * CTRIM = variable capacitor setting. Resolution is 0.3 pF range is
-	 *	   0 pF upto 4.5 pF.
+	 *	   0 pF up to 4.5 pF.
 	 *
 	 * Examples:
 	 * atben transceiver:
diff --git a/net/mac802154/iface.c b/net/mac802154/iface.c
index b823720630e7..ff6e99257bc8 100644
--- a/net/mac802154/iface.c
+++ b/net/mac802154/iface.c
@@ -521,7 +521,7 @@ static void ieee802154_if_setup(struct net_device *dev)
 
 	/* Let hard_header_len set to IEEE802154_MIN_HEADER_LEN. AF_PACKET
 	 * will not send frames without any payload, but ack frames
-	 * has no payload, so substract one that we can send a 3 bytes
+	 * has no payload, so subtract one that we can send a 3 bytes
 	 * frame. The xmit callback assumes at least a hard header where two
 	 * bytes fc and sequence field are set.
 	 */
-- 
2.48.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help