Re: [PATCH iwl-next 6/8] e1000e: disable NAPI while interface is down

This is an AI-generated review of your patch. The human sending this
email has considered the AI review valid, or at least plausible.
Full review at: https://sashiko.dev/#/patchset/20260830232146.36948-2-tactii@gmail.com?part=6
---
e1000e: disable NAPI while interface is down

This commit moves napi_disable into e1000e_down and adds napi_enable to
e1000e_up to ensure NAPI is disabled during reconfiguration windows.

[ ... ]

[Severity: High]
Does this change introduce an infinite hang in napi_disable() due to
concurrent or duplicate e1000e_down() calls?

A runtime PM suspend callback (e1000e_pm_runtime_suspend) can execute
concurrently with an ethtool operation like e1000_set_ringparam. The ethtool
operation sets the __E1000_RESETTING bit and holds it while allocating
resources.

The PM suspend callback waits on this bit but uses a bounded timeout (300ms).
If the ethtool operation takes longer than 300ms, the PM callback times out,
prints a WARN_ON, and unconditionally calls e1000e_down():

e1000e_pm_runtime_suspend() {
        while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
                usleep_range(10000, 11000);

        WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));

        /* Down the device without resetting the hardware */
        e1000e_down(adapter, false);
}

Because the ethtool operation also called (or is calling) e1000e_down(),
napi_disable() is executed either concurrently or sequentially on an
already-disabled NAPI struct, leading to an infinite hang waiting for
NAPI_STATE_SCHED.

[Severity: High]
Could this also lead to a sequential double napi_disable() hang due to state
mismatches where e1000e_down() is called but netif_running() remains true?

The e1000e_pm_thaw() function attempts to bring the device back up after a
freeze/suspend. If e1000_request_irq() fails, it exits via the err_irq label
without calling e1000e_up(), leaving NAPI disabled:

e1000e_pm_thaw() {
        rc = e1000_request_irq(adapter);
        if (rc)
                goto err_irq;

        e1000e_up(adapter);
}

However, the device's IFF_UP flag is untouched, so netif_running() remains
true. Subsequently, if an administrator changes the MTU via
e1000_change_mtu(), the driver checks netif_running() and blindly calls
e1000e_down():

e1000_change_mtu() {
        if (netif_running(netdev))
                e1000e_down(adapter, true);
}

This invokes napi_disable() a second time sequentially, which hangs
indefinitely because the NAPI instance was never re-enabled.

 
 	timer_delete_sync(&adapter->watchdog_timer);
 	timer_delete_sync(&adapter->phy_info_timer);