[PATCH net-next 05/10] net: dsa: microchip: extract ptp_get_pin
From: Bastien Curutchet (Schneider Electric) <hidden>
Date: 2026-08-31 13:25:39
Also in:
lkml
Subsystem:
microchip ksz series ethernet switch driver, networking drivers, networking [dsa], the rest · Maintainers:
Woojung Huh, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
The KSZ8463 supports periodic outputs but doesn't handle them in the same way as the other KSZ switches. To add proper support for the KSZ8463, a dedicated ksz8463_ptp_enable_perout() function needs to be created. This function will use the same algorithm to select the output pin as the common ksz_ptp_enable_perout() function. Extract the pin selection algorithm into a dedicated function so it can be used later by the KSZ8463 support. Signed-off-by: Bastien Curutchet (Schneider Electric) <redacted> --- drivers/net/dsa/microchip/ksz_ptp.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c
index ea22601f6b26..f97ea9d69ebc 100644
--- a/drivers/net/dsa/microchip/ksz_ptp.c
+++ b/drivers/net/dsa/microchip/ksz_ptp.c@@ -183,17 +183,11 @@ static int ksz_ptp_configure_perout(struct ksz_device *dev, return 0; } -static int ksz_ptp_enable_perout(struct ksz_device *dev, - struct ptp_perout_request const *request, - int on) +static int ksz_ptp_get_pin(struct ksz_device *dev, + struct ptp_perout_request const *request) { struct ksz_ptp_data *ptp_data = &dev->ptp_data; - u64 req_pulse_width_ns; - u64 cycle_width_ns; - u64 pulse_width_ns; - int pin = 0; - u32 data32; - int ret; + int pin; if (request->flags & ~PTP_PEROUT_DUTY_CYCLE) return -EOPNOTSUPP;
@@ -206,6 +200,25 @@ static int ksz_ptp_enable_perout(struct ksz_device *dev, if (pin < 0) return -EINVAL; + return pin; +} + +static int ksz_ptp_enable_perout(struct ksz_device *dev, + struct ptp_perout_request const *request, + int on) +{ + struct ksz_ptp_data *ptp_data = &dev->ptp_data; + u64 req_pulse_width_ns; + u64 cycle_width_ns; + u64 pulse_width_ns; + int pin = 0; + u32 data32; + int ret; + + pin = ksz_ptp_get_pin(dev, request); + if (pin < 0) + return pin; + data32 = FIELD_PREP(PTP_GPIO_INDEX, pin) | FIELD_PREP(PTP_TOU_INDEX, request->index); ret = ksz_rmw32(dev, REG_PTP_UNIT_INDEX__4,
--
2.55.0