[PATCH net-next v3 0/3] net: dsa: realtek: enable RTL8365MB power supplies

The RTL8365MB family has several external power rails (analog, digital I/O
and PLL supplies) that on some boards are gated by regulators. Until now the
driver assumed they were always on, so it could not be used on designs that
keep these rails software-controlled.

This series adds a device-tree description for those supplies and enables
them in the driver before the chip is accessed:

The supplies are optional: boards that hard-wire the rails work unchanged

Ahmad Fatoum (1):
  net: dsa: realtek: rtl83xx: add support for enabling supplies

Oleksij Rempel (2):
  dt-bindings: net: dsa: realtek: add RTL8365MB power supplies
  net: dsa: realtek: rtl83xx: use dev_err_cast_probe() for reset GPIO

 .../devicetree/bindings/net/dsa/realtek.yaml  | 33 +++++++++++++++++++
 drivers/net/dsa/realtek/realtek.h             |  3 ++
 drivers/net/dsa/realtek/rtl8365mb_main.c      |  6 ++++
 drivers/net/dsa/realtek/rtl83xx.c             | 23 ++++++++++---
 4 files changed, 60 insertions(+), 5 deletions(-)

--
2.47.3