Thread (21 messages) flat view 21 messages, 4 authors, 6d ago
COOLING6d REVIEWED: 2 (1M)

Revision v4 of 4 in this series; 2 review trailers.

Revisions (4)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v4 current

[PATCH net-next v4 02/15] gve: refactor initialization with helper functions

From: Harshitha Ramamurthy <hramamurthy@google.com>
Date: 2026-08-14 02:14:10
Also in: bpf, lkml
Subsystem: networking drivers, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

In the interest of commonizing code, refactor gve_probe()
and gve_init_priv() with a few helper functions that can
be expanded and utilized in upcoming patches that add the
mailbox ABI to the driver. The helper functions are:

- gve_set_num_ntfy_blks()
- gve_set_num_queues()

Reorder code to combine lines that accomplish a similar objective
like setting defaults. Move setting HW-GRO and UDP GSO support out
of an Adminq method into gve_init_priv().

These changes are just code movement, no functional change.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jordan Rhee <redacted>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
---
v4:
- move the new functions to gve_adminq.c since that will be their final
  home in the following patches (Przemek Kitszel)
v2:
- ensure to call verify driver compatibility in reset path

 drivers/net/ethernet/google/gve/gve_adminq.c | 49 ++++++++++++++---
 drivers/net/ethernet/google/gve/gve_adminq.h |  2 +
 drivers/net/ethernet/google/gve/gve_main.c   | 58 +++++++-------------
 3 files changed, 62 insertions(+), 47 deletions(-)
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 70ffed8b52c3..fe0dedfb25d7 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -1117,14 +1117,6 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 
 	gve_set_default_rss_sizes(priv);
 
-	/* DQO supports HW-GRO and UDP_GSO */
-	if (gve_is_dqo(priv)) {
-		u64 additional_features = NETIF_F_GRO_HW | NETIF_F_GSO_UDP_L4;
-
-		priv->dev->hw_features |= additional_features;
-		priv->dev->features |= additional_features;
-	}
-
 	priv->max_registered_pages =
 				be64_to_cpu(descriptor->max_registered_pages);
 	mtu = be16_to_cpu(descriptor->mtu);
@@ -1600,3 +1592,44 @@ int gve_adminq_query_rss_config(struct gve_priv *priv, struct ethtool_rxfh_param
 	dma_pool_free(priv->adminq_pool, descriptor, descriptor_bus);
 	return err;
 }
+
+int gve_set_num_ntfy_blks(struct gve_priv *priv)
+{
+	int num_ntfy;
+
+	num_ntfy = pci_msix_vec_count(priv->pdev);
+	if (num_ntfy <= 0) {
+		dev_err(&priv->pdev->dev,
+			"could not count MSI-x vectors: err=%d\n", num_ntfy);
+		return num_ntfy;
+	} else if (num_ntfy < GVE_MIN_MSIX) {
+		dev_err(&priv->pdev->dev, "gve needs at least %d MSI-x vectors, but only has %d\n",
+			GVE_MIN_MSIX, num_ntfy);
+		return -EINVAL;
+	}
+
+	/* gvnic has one Notification Block per MSI-x vector, except for the
+	 * management vector
+	 */
+	priv->num_ntfy_blks = (num_ntfy - 1) & ~0x1;
+	priv->mgmt_msix_idx = priv->num_ntfy_blks;
+
+	return 0;
+}
+
+void gve_set_num_queues(struct gve_priv *priv)
+{
+	priv->tx_cfg.max_queues =
+		min_t(int, priv->tx_cfg.max_queues, priv->num_ntfy_blks / 2);
+	priv->rx_cfg.max_queues =
+		min_t(int, priv->rx_cfg.max_queues, priv->num_ntfy_blks / 2);
+
+	priv->tx_cfg.num_queues = priv->tx_cfg.max_queues;
+	priv->rx_cfg.num_queues = priv->rx_cfg.max_queues;
+	if (priv->default_num_queues > 0) {
+		priv->tx_cfg.num_queues = min_t(int, priv->default_num_queues,
+						priv->tx_cfg.num_queues);
+		priv->rx_cfg.num_queues = min_t(int, priv->default_num_queues,
+						priv->rx_cfg.num_queues);
+	}
+}
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index 8e80f36116ec..82b52424a63f 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -656,5 +656,7 @@ int gve_adminq_report_nic_ts(struct gve_priv *priv,
 struct gve_ptype_lut;
 int gve_adminq_get_ptype_map_dqo(struct gve_priv *priv,
 				 struct gve_ptype_lut *ptype_lut);
+int gve_set_num_ntfy_blks(struct gve_priv *priv);
+void gve_set_num_queues(struct gve_priv *priv);
 
 #endif /* _GVE_ADMINQ_H */
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 30bf6df4ebc5..37e6205e2eef 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -2400,7 +2400,6 @@ static const struct xdp_metadata_ops gve_xdp_metadata_ops = {
 
 static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 {
-	int num_ntfy;
 	int err;
 
 	/* Set up the adminq */
@@ -2431,57 +2430,38 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 			"Could not get device information: err=%d\n", err);
 		goto err;
 	}
-	priv->dev->mtu = priv->dev->max_mtu;
-	num_ntfy = pci_msix_vec_count(priv->pdev);
-	if (num_ntfy <= 0) {
+
+	err = gve_set_num_ntfy_blks(priv);
+	if (err) {
 		dev_err(&priv->pdev->dev,
-			"could not count MSI-x vectors: err=%d\n", num_ntfy);
-		err = num_ntfy;
+			"Could not setup notify blocks: err=%d\n", err);
 		goto err;
-	} else if (num_ntfy < GVE_MIN_MSIX) {
-		dev_err(&priv->pdev->dev, "gve needs at least %d MSI-x vectors, but only has %d\n",
-			GVE_MIN_MSIX, num_ntfy);
-		err = -EINVAL;
-		goto err;
-	}
-
-	/* Big TCP is only supported on DQO */
-	if (!gve_is_gqi(priv))
-		netif_set_tso_max_size(priv->dev, GVE_DQO_TX_MAX);
-
-	priv->rx_copybreak = GVE_DEFAULT_RX_COPYBREAK;
-	/* gvnic has one Notification Block per MSI-x vector, except for the
-	 * management vector
-	 */
-	priv->num_ntfy_blks = (num_ntfy - 1) & ~0x1;
-	priv->mgmt_msix_idx = priv->num_ntfy_blks;
-	priv->numa_node = dev_to_node(&priv->pdev->dev);
-
-	priv->tx_cfg.max_queues =
-		min_t(int, priv->tx_cfg.max_queues, priv->num_ntfy_blks / 2);
-	priv->rx_cfg.max_queues =
-		min_t(int, priv->rx_cfg.max_queues, priv->num_ntfy_blks / 2);
-
-	priv->tx_cfg.num_queues = priv->tx_cfg.max_queues;
-	priv->rx_cfg.num_queues = priv->rx_cfg.max_queues;
-	if (priv->default_num_queues > 0) {
-		priv->tx_cfg.num_queues = min_t(int, priv->default_num_queues,
-						priv->tx_cfg.num_queues);
-		priv->rx_cfg.num_queues = min_t(int, priv->default_num_queues,
-						priv->rx_cfg.num_queues);
 	}
-	priv->tx_cfg.num_xdp_queues = 0;
 
+	gve_set_num_queues(priv);
 	dev_info(&priv->pdev->dev, "TX queues %d, RX queues %d\n",
 		 priv->tx_cfg.num_queues, priv->rx_cfg.num_queues);
 	dev_info(&priv->pdev->dev, "Max TX queues %d, Max RX queues %d\n",
 		 priv->tx_cfg.max_queues, priv->rx_cfg.max_queues);
 
-	if (!gve_is_gqi(priv)) {
+	if (gve_is_dqo(priv)) {
+		/* DQO supports HW-GRO and UDP_GSO */
+		u64 additional_features = NETIF_F_GRO_HW | NETIF_F_GSO_UDP_L4;
+
+		priv->dev->hw_features |= additional_features;
+		priv->dev->features |= additional_features;
+
 		priv->tx_coalesce_usecs = GVE_TX_IRQ_RATELIMIT_US_DQO;
 		priv->rx_coalesce_usecs = GVE_RX_IRQ_RATELIMIT_US_DQO;
+
+		/* Big TCP is only supported on DQO */
+		netif_set_tso_max_size(priv->dev, GVE_DQO_TX_MAX);
 	}
 
+	priv->dev->mtu = priv->dev->max_mtu;
+	priv->numa_node = dev_to_node(&priv->pdev->dev);
+	priv->tx_cfg.num_xdp_queues = 0;
+	priv->rx_copybreak = GVE_DEFAULT_RX_COPYBREAK;
 	priv->ts_config.tx_type = HWTSTAMP_TX_OFF;
 	priv->ts_config.rx_filter = HWTSTAMP_FILTER_NONE;
 
-- 
2.55.0.691.gc56d675ccc-goog
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help