[net-next,PATCH v2 1/5] dt-bindings: net: add phy-supply property for stm32
flat view
COLD44d
From: Christophe Roullier <hidden>
Date: 2026-08-12 09:12:20
Also in:
linux-arm-kernel, linux-devicetree, lkml
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v2 of 2 in this series.
Revisions (2)
- v1 [diff vs current]
- v2 current
Phandle to a regulator that provides power to the PHY. This regulator will be managed during the PHY power on/off sequence. Signed-off-by: Christophe Roullier <redacted> --- Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index 987254900d0da..0c7eb1ccadd47 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml@@ -99,6 +99,9 @@ properties: encompases the glue register, the offset of the control register and the mask to set bitfield in control register + phy-supply: + description: PHY regulator + st,ext-phyclk: description: set this property in RMII mode when you have PHY without crystal 50MHz and want to
--
2.43.0