[PATCH net-next v7 1/3] dpll: zl3073x: scale poll interval proportionally to timeout

Replace the fixed 10 us poll sleep in zl3073x_poll_zero_u8() with
timeout_us / 50, scaling the sleep interval proportionally to the
timeout for all callers.

Testing showed that existing callers (mailbox, HWREG, DF read,
frequency measurement and phase error polls with 25-50 ms timeouts)
typically completed in low hundreds of sleep cycles with the fixed
10 us interval. With the scaled interval the cycle count drops to
single digits. The longer PTP-related timeouts (up to 3000 ms for
phase step) added in the following patches benefit most, avoiding
on the order of 10^5 bus transactions per wait.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
 drivers/dpll/zl3073x/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dpll/zl3073x/core.c b/drivers/dpll/zl3073x/core.c
index 5b2d77f2c2288e..2e8b52c8de5e26 100644
--- a/drivers/dpll/zl3073x/core.c
+++ b/drivers/dpll/zl3073x/core.c

@@ -322,7 +322,7 @@ int zl3073x_write_u48(struct zl3073x_dev *zldev, unsigned int reg, u64 val)
 int zl3073x_poll_zero_u8(struct zl3073x_dev *zldev, unsigned int reg,
 			 u8 mask, unsigned int timeout_us)
 {
-#define ZL_POLL_SLEEP_US 10
+	unsigned int sleep_us = timeout_us / 50;
 	unsigned int val;
 
 	/* Check the register is 8bit */

@@ -336,7 +336,7 @@ int zl3073x_poll_zero_u8(struct zl3073x_dev *zldev, unsigned int reg,
 	reg = ZL_REG_ADDR(reg) + ZL_RANGE_OFFSET;
 
 	return regmap_read_poll_timeout(zldev->regmap, reg, val, !(val & mask),
-					ZL_POLL_SLEEP_US, timeout_us);
+					sleep_us, timeout_us);
 }
 
 int zl3073x_mb_op(struct zl3073x_dev *zldev, unsigned int op_reg, u8 op_val,

-- 
2.54.0