[PATCH 00/25] ARM: rockchip: Add peripheral support for RV1106
From: Vladislav Leonov <hidden>
Date: 2026-08-10 12:15:53
Also in:
linux-arm-kernel, linux-clk, linux-crypto, linux-devicetree, linux-i2c, linux-phy, linux-pwm, linux-rockchip, linux-spi, linux-usb, lkml
Basic support for the Rockchip RV1106/RV1103 SoCs currently under review. This series builds on top of that and enables the peripherals needed to bring up a board beyond a serial console: - CRU reset controller support (dt-bindings + clk driver), needed by most of the other peripherals below. - Ethernet (GMAC) via dwmac-rk. - USB2 PHY and USB3-OTG (DWC3). - I2C (rk3x). - DMA (PL330) + support DMA for the UART nodes. - SPI, including a new SCLK_IN_SPI1 clock gate. - RNG. - SDMMC1. - A dts-only quirk (arm,cpu-registers-not-fw-configured) needed on the ARM timer node when booting without a secure firmware that pre-configures the CPU timer registers. - PWM. Each new dt-binding is added ahead of the driver and dts nodes that depend on it, so the series bisects cleanly. This series depends on: - "Add support for the Rockchip RV1106 and RV1103" (v3) https://lore.kernel.org/all/20260729133609.3465563-1-sjg@chromium.org (local) - "pinctrl: Add support for the Rockchip RV1106" (v3) https://lore.kernel.org/all/20260729132736.3807082-1-sjg@chromium.org (local) Testing: boot-tested on custom RV1106 board, with every peripheral touched by this series: reset/CRU, Ethernet, USB2 PHY/USB3 DWC3, I2C, DMA+UART, SPI, RNG, SDMMC1 and PWM - exercised and confirmed working. Vladislav Leonov (25): dt-bindings: reset: Add RV1106 CRU reset definitions clk: rockchip: Add reset controller support for RV1106 ARM: dts: rockchip: Add reset bindings to RV1106 dt-bindings: net: rockchip-dwmac: add RV1106 compatible net: ethernet: stmicro: stmmac: dwmac-rk: Add RV1106 support ARM: dts: rockchip: Add Ethernet GMAC node for RV1106 dt-bindings: phy: rockchip,inno-usb2phy: Add RV1106 compatible phy: rockchip: inno-usb2: Add support for RV1106 dt-bindings: usb: rockchip,dwc3: add RV1106 SoC support ARM: dts: rockchip: Add USB2 PHY and USB3-OTG (DWC3) nodes for RV1106 dt-bindings: i2c: rk3x: Add RV1106 compatible ARM: dts: rockchip: Add I2C nodes for RV1106 ARM: dts: rockchip: Add DMAC node for RV1106 ARM: dts: rockchip: Add DMA support to UART nodes dt-bindings: clock: rockchip: Add SCLK_IN_SPI1 for RV1106 clk: rockchip: Add SCLK_IN_SPI1 gate for RV1106 dt-bindings: spi: rockchip: Add RV1106 compatible spi: rockchip: Add support for RV1106 ARM: dts: rockchip: Add SPI nodes for RV1106 dt-bindings: rng: rockchip: Add RV1106 compatible ARM: dts: rockchip: Add RNG node for RV1106 ARM: dts: rockchip: Add SDMMC1 node for RV1106 ARM: dts: rockchip: add arm,cpu-registers-not-fw-configured to RV1106 timer node dt-bindings: pwm: rockchip: Add RV1106 compatible ARM: dts: rockchip: Add PWM nodes for RV1106 .../devicetree/bindings/i2c/i2c-rk3x.yaml | 1 + .../bindings/net/rockchip-dwmac.yaml | 2 + .../bindings/phy/rockchip,inno-usb2phy.yaml | 9 +- .../devicetree/bindings/pwm/pwm-rockchip.yaml | 8 + .../bindings/rng/rockchip,rk3588-rng.yaml | 11 +- .../devicetree/bindings/spi/spi-rockchip.yaml | 5 + .../bindings/usb/rockchip,dwc3.yaml | 35 +- arch/arm/boot/dts/rockchip/rv1106.dtsi | 426 ++++++++++++++++++ drivers/clk/rockchip/Makefile | 2 +- drivers/clk/rockchip/clk-rv1106.c | 4 + drivers/clk/rockchip/clk.h | 1 + drivers/clk/rockchip/rst-rv1106.c | 340 ++++++++++++++ .../net/ethernet/stmicro/stmmac/dwmac-rk.c | 55 +++ drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 76 ++++ drivers/spi/spi-rockchip.c | 1 + .../dt-bindings/clock/rockchip,rv1106-cru.h | 2 + .../dt-bindings/reset/rockchip,rv1106-cru.h | 305 +++++++++++++ 17 files changed, 1272 insertions(+), 11 deletions(-) create mode 100644 drivers/clk/rockchip/rst-rv1106.c create mode 100644 include/dt-bindings/reset/rockchip,rv1106-cru.h --- base-commit: ac414f5eda0814030636177593400acdacfe5e1e branch: rv1106 -- 2.47.3