Re: [PATCH net 0/5] net: stmmac: Fix double VLAN 802.1ad tag handling

On Wed, Jul 29, 2026 at 09:51:04AM +0000, Ovidiu Panait wrote:

Currently, hardware VLAN stripping is broken for 802.1ad tags. vlan_rx_hw()
hardcodes ETH_P_8021Q when putting the hardware tag into the skb, rather
than using the actual protocol from the packet. Because of this, packets
that contain an 802.1ad outer tag are incorrectly passed up the stack as
having an 802.1Q tag.

This issue was observed on the Renesas RZ/V2H platform (which has a dwmac4
IP), when testing QinQ ping:

  # DUT
  ip link add link end0 name end0.100 type vlan proto 802.1ad id 100
  ip link add link end0.100 name end0.100.200 type vlan proto 802.1q id 200
  ip addr add 172.16.3.2/24 dev end0.100.200
  ip link set end0 up
  ip link set end0.100 up
  ip link set end0.100.200 up

  # Peer
  ip link add link eth0 name eth0.100 type vlan proto 802.1ad id 100
  ip link add link eth0.100 name eth0.100.200 type vlan proto 802.1q id 200
  ip addr add 172.16.3.1/24 dev eth0.100.200
  ip link set eth0 up
  ip link set eth0.100 up
  ip link set eth0.100.200 up
  ping 172.16.3.2
    -- FAIL --

I stretch goal, if you are interested and have time. Can you turn this
into a test somewhere in tools/testing/selftests/net ? If one MAC
driver has it wrong, there are probably other MAC drivers which are
also wrong.

	Andrew