Re: [PATCH net-next] net: phy: motorcomm: enable the reference clock for YT8531

On Sun, Jul 19, 2026 at 03:45:55PM +1200, Jiaxing Hu wrote:

The YT8531 needs a 25 MHz reference. On boards without a local crystal
it is fed from the SoC, described as a clock on the PHY node. Get and
enable it in probe so the PHY is clocked before its registers are
accessed. The clock is optional, so crystal-clocked boards are
unaffected.

Signed-off-by: Jiaxing Hu <redacted>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew