Add device tree binding documentation for the DAPU Telecom DAP8211R(I)
Gigabit Ethernet PHY.

The PHY supports TX and RX clock delays in 150 ps steps from 0 to 2250 ps,
with a default of 1950 ps if not specified. The tx-inverted-clk flag
provides a vendor-specific extension for boards where PCB trace length or
MAC requirements necessitate 180-degree clock phase shift.

Signed-off-by: Artem Shimko <redacted>
---
 .../bindings/net/dapu,dap8211r.yaml           | 78 +++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/dapu,dap8211r.yaml

diff --git a/Documentation/devicetree/bindings/net/dapu,dap8211r.yaml b/Documentation/devicetree/bindings/net/dapu,dap8211r.yaml
new file mode 100644
index 000000000000..208a82f779d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dapu,dap8211r.yaml

@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dapu,dap8211r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DAPU Telecom DAP8211R(I) Gigabit Ethernet PHY
+
+maintainers:
+  - Artem Shimko <a.shimko.dev@gmail.com>
+
+description: |
+  The DAP8211R(I) is a Gigabit Ethernet PHY with RGMII interface,
+  supporting IEEE 802.3az Energy Efficient Ethernet, IEEE 1588 SyncE,
+  and an internal packet generator for diagnostics.
+
+  Specifications:
+    - 10BASE-Te, 100BASE-TX, 1000BASE-T
+    - RGMII with configurable TX/RX clock delays (150 ps steps, 0-2250 ps)
+    - IEEE 802.3az-2010 Energy Efficient Ethernet
+    - IEEE 1588 SyncE support
+    - Internal packet generator and checker for link diagnostics
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  compatible:
+    const: ethernet-phy-id0008.011b
+
+  reg:
+    maxItems: 1
+
+  rx-internal-delay-ps:
+    description:
+      RGMII RX clock delay in picoseconds. The PHY supports 150 ps steps
+      from 0 to 2250 ps. If not specified, defaults to 1950 ps. If the
+      requested value does not exactly match a supported step, the driver
+      selects the nearest supported value and issues a warning.
+    enum: [0, 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500,
+           1650, 1800, 1950, 2100, 2250]
+    default: 1950
+
+  tx-internal-delay-ps:
+    description:
+      RGMII TX clock delay in picoseconds. The PHY supports 150 ps steps
+      from 0 to 2250 ps. If not specified, defaults to 1950 ps. If the
+      requested value does not exactly match a supported step, the driver
+      selects the nearest supported value and issues a warning.
+    enum: [0, 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500,
+           1650, 1800, 1950, 2100, 2250]