Re: [PATCH RFC 4/8] clk: sunxi-ng: a733: Add PLL clocks support

Hi Junhui,

Register check for the PLLs against the public A733 User Manual V0.92:
13 of the 14 PLL control registers match the manual's offsets
(PLL_DDR 0x0020 through PLL_DE 0x02E0, section 4.1.6.1 onwards).

The one exception is pll-ref at 0x0000: the manual's CCU register list
starts at 0x0020 (PLL_DDR), so the PLL_REF control register is not in
the public V0.92 document. It does match the vendor kernel's CCU
(SUN60IW2_PLL_REF_CTRL_REG 0x0000), so a short provenance note near the
definition might help future readers, same as for the other
vendor-sourced entries discussed in this thread. For what it's worth,
on a Radxa Cubie A7S (26 MHz DCXO) we can confirm at runtime that
pll-ref produces the normalized 24 MHz reference with the hosc-side
clocks reading 26 MHz, so the modeling demonstrably works on hardware.

Thanks,
Enzo