[PATCH net-next v6 0/2] airoha: add the capability to configure GDM3/GDM4 as WAN/LAN on demand
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: 2026-06-29 16:18:00
Also in:
linux-arm-kernel, linux-mediatek
Add the capability to configure GDM3/GDM4 as WAN/LAN on demand when QoS offload is created or destroyed. Make dev->qdma an RCU pointer so the TX path can safely dereference it without holding RTNL. Introduce airoha_qdma_start() and airoha_qdma_stop() helpers. --- Changes in v6: - Rebase on top of next-next - Add patch 1/3: "rename airoha_priv_flags to airoha_dev_flags" - Drop patch 2/3: "refactor QDMA start/stop into reusable helpers" - Link to v5: https://lore.kernel.org/r/20260611-airoha-ethtool-priv_flags-v5-0-c11de08486d1@kernel.org (local) Changes in v5: - Add patch 1/3: use int instead of atomic_t for qdma users counter - Protect dev->flags with flow_offload_mutex mutex. - Introduce AIROHA_PRIV_F_QOS in order to handle better WAN/LAN switching. - Link to v4: https://lore.kernel.org/r/20260610-airoha-ethtool-priv_flags-v4-0-60e89cf28fea@kernel.org (local) Changes in v4: - Move back QDMA TX/RX DMA enable to airoha_dev_open()/airoha_dev_stop(). - Configure GDM3/4 as WAN if GDM2 is not available in ndo_init() callback. - Protect qdma pointer in airoha_gdm_dev struct using RCU. - Rely on rtnl_dereference() to access qdma pointer in the control path. - Add airoha_qdma_start() and airoha_qdma_stop() utility routines in patch 1/2 - Link to v3: https://lore.kernel.org/r/20260608-airoha-ethtool-priv_flags-v3-1-3e8e3dc3f715@kernel.org (local) Changes in v3: - Do not introduce ethtool private flags support to configure LAN/WAN for GDM3/4 and rely on tc qdisc offload for it instead. - Set GDM3/4 ports as LAN by default. - Move QDMA TX/RX DMA enable from airoha_dev_open() to airoha_probe() and the corresponding disable from airoha_dev_stop() to airoha_qdma_cleanup(). - Link to v2: https://lore.kernel.org/r/20260607-airoha-ethtool-priv_flags-v2-1-742c7aa1e182@kernel.org (local) Changes in v2: - Rework airoha_dev_set_wan_flag routine - Enable GDM_STRIP_CRC_MASK in airoha_disable_gdm2_loopback() - Do not always reset REG_SRC_PORT_FC_MAP6 in airoha_disable_gdm2_loopback() but use the same condition used in airoha_enable_gdm2_loopback(). - Link to v1: https://lore.kernel.org/r/20260606-airoha-ethtool-priv_flags-v1-1-401b2c9fe9f1@kernel.org (local) --- Lorenzo Bianconi (2): net: airoha: rename airoha_priv_flags to airoha_dev_flags net: airoha: defer GDM3/GDM4 WAN mode and GDM2 loopback to QoS offload drivers/net/ethernet/airoha/airoha_eth.c | 231 ++++++++++++++++++++++++++---- drivers/net/ethernet/airoha/airoha_eth.h | 19 ++- drivers/net/ethernet/airoha/airoha_ppe.c | 9 +- drivers/net/ethernet/airoha/airoha_regs.h | 1 + 4 files changed, 223 insertions(+), 37 deletions(-) --- base-commit: 805185b7c7a1069e407b6f7b3bc98e44d415f484 change-id: 20260606-airoha-ethtool-priv_flags-b6aa70caa780 Best regards, -- Lorenzo Bianconi [off-list ref]