[PATCH net 1/5] net: hns3: unify copper port ksettings configuration path
From: Jijie Shao <shaojijie@huawei.com>
Date: 2026-06-17 11:28:25
Also in:
lkml
Subsystem:
hisilicon network subsystem 3 driver (hns3), hisilicon network subsystem driver, networking drivers, the rest · Maintainers:
Jian Shen, Jijie Shao, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Shuaisong Yang <redacted> Refactor hns3_set_link_ksettings() and hclge_set_phy_link_ksettings() to unify the configuration path for copper ports. Previously, netdevs with a native kernel phy attached bypassed the main MAC parameter caching logic and returned early via phy_ethtool_ksettings_set(). This prevented the driver from updating hdev->hw.mac.req_xxx variables for kernel PHY setups, leaving them out-of-sync during reset recovery. Clean this up by routing all copper port configurations through ops->set_phy_link_ksettings(), and perform driver-level or kernel-level PHY arbitration inside hclge_set_phy_link_ksettings() via hnae3_dev_phy_imp_supported(). This ensures that the user's intended link profiles (req_speed, req_duplex, req_autoneg) are uniformly recorded across all copper and fiber deployment topologies, laying the groundwork for stable reset recovery. Signed-off-by: Shuaisong Yang <redacted> Signed-off-by: Jijie Shao <shaojijie@huawei.com> --- .../ethernet/hisilicon/hns3/hns3_ethtool.c | 26 ++++++++----------- .../hisilicon/hns3/hns3pf/hclge_main.c | 24 ++++++++++++++--- 2 files changed, 32 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 9cb7ce9fd311..0c215f5c6a9b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c@@ -811,12 +811,11 @@ static int hns3_get_link_ksettings(struct net_device *netdev, } static int hns3_check_ksettings_param(const struct net_device *netdev, - const struct ethtool_link_ksettings *cmd) + const struct ethtool_link_ksettings *cmd, + u8 media_type) { struct hnae3_handle *handle = hns3_get_handle(netdev); const struct hnae3_ae_ops *ops = hns3_get_ops(handle); - u8 module_type = HNAE3_MODULE_TYPE_UNKNOWN; - u8 media_type = HNAE3_MEDIA_TYPE_UNKNOWN; u32 lane_num; u8 autoneg; u32 speed;
@@ -836,9 +835,6 @@ static int hns3_check_ksettings_param(const struct net_device *netdev, return 0; } - if (ops->get_media_type) - ops->get_media_type(handle, &media_type, &module_type); - if (cmd->base.duplex == DUPLEX_HALF && media_type != HNAE3_MEDIA_TYPE_COPPER) { netdev_err(netdev,
@@ -863,6 +859,8 @@ static int hns3_set_link_ksettings(struct net_device *netdev, struct hnae3_handle *handle = hns3_get_handle(netdev); struct hnae3_ae_dev *ae_dev = hns3_get_ae_dev(handle); const struct hnae3_ae_ops *ops = hns3_get_ops(handle); + u8 module_type = HNAE3_MODULE_TYPE_UNKNOWN; + u8 media_type = HNAE3_MEDIA_TYPE_UNKNOWN; int ret; /* Chip don't support this mode. */
@@ -878,22 +876,20 @@ static int hns3_set_link_ksettings(struct net_device *netdev, cmd->base.autoneg, cmd->base.speed, cmd->base.duplex, cmd->lanes); - /* Only support ksettings_set for netdev with phy attached for now */ - if (netdev->phydev) { - if (cmd->base.speed == SPEED_1000 && - cmd->base.autoneg == AUTONEG_DISABLE) - return -EINVAL; + if (!ops->get_media_type) + return -EOPNOTSUPP; + ops->get_media_type(handle, &media_type, &module_type); - return phy_ethtool_ksettings_set(netdev->phydev, cmd); - } else if (test_bit(HNAE3_DEV_SUPPORT_PHY_IMP_B, ae_dev->caps) && - ops->set_phy_link_ksettings) { + if (media_type == HNAE3_MEDIA_TYPE_COPPER) { + if (!ops->set_phy_link_ksettings) + return -EOPNOTSUPP; return ops->set_phy_link_ksettings(handle, cmd); } if (ae_dev->dev_version < HNAE3_DEVICE_VERSION_V2) return -EOPNOTSUPP; - ret = hns3_check_ksettings_param(netdev, cmd); + ret = hns3_check_ksettings_param(netdev, cmd, media_type); if (ret) return ret;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index dd4045c773d4..5a00797d9252 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c@@ -3358,8 +3358,8 @@ static int hclge_get_phy_link_ksettings(struct hnae3_handle *handle, } static int -hclge_set_phy_link_ksettings(struct hnae3_handle *handle, - const struct ethtool_link_ksettings *cmd) +hclge_ethtool_ksettings_set(struct hnae3_handle *handle, + const struct ethtool_link_ksettings *cmd) { struct hclge_desc desc[HCLGE_PHY_LINK_SETTING_BD_NUM]; struct hclge_vport *vport = hclge_get_vport(handle);
@@ -3400,10 +3400,28 @@ hclge_set_phy_link_ksettings(struct hnae3_handle *handle, return ret; } + linkmode_copy(hdev->hw.mac.advertising, cmd->link_modes.advertising); + return 0; +} + +static int +hclge_set_phy_link_ksettings(struct hnae3_handle *handle, + const struct ethtool_link_ksettings *cmd) +{ + struct hclge_vport *vport = hclge_get_vport(handle); + struct hclge_dev *hdev = vport->back; + int ret; + + if (hnae3_dev_phy_imp_supported(hdev)) + ret = hclge_ethtool_ksettings_set(handle, cmd); + else + ret = phy_ethtool_ksettings_set(handle->netdev->phydev, cmd); + if (ret) + return ret; + hdev->hw.mac.req_autoneg = cmd->base.autoneg; hdev->hw.mac.req_speed = cmd->base.speed; hdev->hw.mac.req_duplex = cmd->base.duplex; - linkmode_copy(hdev->hw.mac.advertising, cmd->link_modes.advertising); return 0; }
--
2.33.0