[PATCH v2 3/4] arm64: qcom: ipq5018: Add GEPHY RX and TX clocks
flat view
STALE144d
SUPERSEDED
From: George Moussalem via B4 Relay <devnull+george.moussalem.outlook.com@kernel.org>
Date: 2026-06-02 06:50:47
Also in:
b4-sent, linux-arm-msm, linux-devicetree, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Status: Superseded by v4 (posted 2026-06-08). [go to v4]
Revision v2 (3 revisions archived).
Revisions (3)
- v1
- v2 current [diff against previous]
- v4 [diff against previous]
From: George Moussalem <redacted>
Add RX and TX clocks for the IPQ5018 GEPHY to enable the datapath.
Fixes: f5f2b835e316 ("arm64: dts: qcom: ipq5018: Add GE PHY to internal mdio bus")
Signed-off-by: George Moussalem <redacted>
---
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 6f8004a22a1f..60c27a6f2b10 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi@@ -229,6 +229,9 @@ ge_phy: ethernet-phy@7 { compatible = "ethernet-phy-id004d.d0c0"; reg = <7>; + clocks = <&gcc GCC_GEPHY_RX_CLK>, + <&gcc GCC_GEPHY_TX_CLK>; + clock-names = "rx", "tx"; resets = <&gcc GCC_GEPHY_MISC_ARES>; }; };
--
2.53.0