[PATCH 3/4] dt-bindings: net: dsa: remove obsolete dsa.txt
STALE122d
From: Akash Sukhavasi <hidden>
Date: 2026-05-29 05:23:01
Also in:
linux-devicetree, linux-doc, lkml
Subsystem:
documentation, networking drivers, networking [dsa], networking [general], open firmware and flattened device tree bindings, the rest · Maintainers:
Jonathan Corbet, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
dsa.txt has been a redirect to dsa.yaml since commit bce58590d1bd
("dt-bindings: net: dsa: Add DSA yaml binding") introduced the .yaml
schema. The .yaml has the same filename in the same directory, making
this redirect unnecessary for discoverability.
Two files still reference dsa.txt, forcing readers through an extra
hop to reach the .yaml. The stub has not been touched since August
2020. Update references in lan9303.txt and
Documentation/networking/dsa/dsa.rst to point directly to dsa.yaml
and remove the stub.
Signed-off-by: Akash Sukhavasi <redacted>
---
Documentation/devicetree/bindings/net/dsa/dsa.txt | 4 ----
Documentation/devicetree/bindings/net/dsa/lan9303.txt | 2 +-
Documentation/networking/dsa/dsa.rst | 2 +-
3 files changed, 2 insertions(+), 6 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/dsa/dsa.txt
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
deleted file mode 100644
index dab208b5c7c7..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ /dev/null@@ -1,4 +0,0 @@ -Distributed Switch Architecture Device Tree Bindings ----------------------------------------------------- - -See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documentation.
diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
index 46a732087f5c..0337c2ccfa9a 100644
--- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt@@ -16,7 +16,7 @@ Optional properties: Subnodes: The integrated switch subnode should be specified according to the binding -described in dsa/dsa.txt. The CPU port of this switch is always port 0. +described in dsa/dsa.yaml. The CPU port of this switch is always port 0. Note: always use 'reg = <0/1/2>;' for the three DSA ports, even if the device is configured to use 1/2/3 instead. This hardware configuration will be
diff --git a/Documentation/networking/dsa/dsa.rst b/Documentation/networking/dsa/dsa.rst
index fd3c254ced1d..42a99f5dfa2e 100644
--- a/Documentation/networking/dsa/dsa.rst
+++ b/Documentation/networking/dsa/dsa.rst@@ -509,7 +509,7 @@ Device Tree ----------- DSA features a standardized binding which is documented in -``Documentation/devicetree/bindings/net/dsa/dsa.txt``. PHY/MDIO library helper +``Documentation/devicetree/bindings/net/dsa/dsa.yaml``. PHY/MDIO library helper functions such as ``of_get_phy_mode()``, ``of_phy_connect()`` are also used to query per-port PHY specific details: interface connection, MDIO bus location, etc.
--
2.54.0