Re: [PATCH v6] net: phy: air_en8811h: add AN8811HB MCU assert/deassert support

Hello:

This patch was applied to netdev/net.git (main)
by Jakub Kicinski [off-list ref]:

On Sun, 24 May 2026 14:39:15 +0800 you wrote:

AN8811HB needs a MCU soft-reset cycle before firmware loading begins.
Assert the MCU (hold it in reset) and immediately deassert (release)
via a dedicated PBUS register pair (0x5cf9f8 / 0x5cf9fc), accessed
through a registered mdio_device at PHY-addr+8.

Add __air_pbus_reg_write() as a low-level helper taking a struct
mdio_device *, create and register the PBUS mdio_device in
an8811hb_probe() and store it in priv->pbusdev, then implement
an8811hb_mcu_assert() / _deassert() on top of it. Add
an8811hb_remove() to unregister the PBUS device on teardown. Wire
both calls into an8811hb_load_firmware() and en8811h_restart_mcu()
so every firmware load or MCU restart on AN8811HB correctly sequences
the reset control registers.

[...]

Here is the summary with links:
  - [v6] net: phy: air_en8811h: add AN8811HB MCU assert/deassert support
    https://git.kernel.org/netdev/net/c/d895767c3378

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html