Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski [off-list ref]:

On Tue, 3 Mar 2026 15:53:02 +0000 you wrote:

This is part 2 of the qcom-ethqos series, part 1 and patch 2 of part 2
has now been merged.

This part of the series focuses on the generic PHY driver, but these
changes have dependencies on the ethernet driver, hence why
it will need to go via net-next. Furthermore, subsequent changes
depend on these patches.

[...]

Here is the summary with links:
  - [net-next,v2,1/7] net: stmmac: qcom-ethqos: move ethqos_set_serdes_speed()
    https://git.kernel.org/netdev/net-next/c/fc8ca5da896e
  - [net-next,v2,2/7] net: stmmac: qcom-ethqos: convert to use phy_set_mode_ext()
    https://git.kernel.org/netdev/net-next/c/4999e0a2ab34
  - [net-next,v2,3/7] phy: qcom-sgmii-eth: remove .set_speed() implementation
    https://git.kernel.org/netdev/net-next/c/b7721597547d
  - [net-next,v2,4/7] phy: qcom-sgmii-eth: use PHY interface mode for SerDes settings
    https://git.kernel.org/netdev/net-next/c/d2b20acdaed8
  - [net-next,v2,5/7] phy: qcom-sgmii-eth: remove qcom_dwmac_sgmii_phy_interface()
    https://git.kernel.org/netdev/net-next/c/f82210ce8cb8
  - [net-next,v2,6/7] phy: qcom-sgmii-eth: relax order of .power_on() vs .set_mode*()
    https://git.kernel.org/netdev/net-next/c/ebe8b48b88ad
  - [net-next,v2,7/7] net: stmmac: qcom-ethqos: remove phy_set_mode_ext() after phy_power_on()
    https://git.kernel.org/netdev/net-next/c/038a8e8eb90d

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html