On Fri, 2026-03-06 at 16:46 +0100, Bartosz Golaszewski wrote:

Add support for the firmware-managed variant of the DesignWare MAC on
the sa8255p platform. This series contains new DT bindings and driver
changes required to support the MAC in the STMMAC driver.

It also reorganizes the ethqos code quite a bit to make the introduction
of power domains into the driver a bit easier on the eye.

The DTS changes will go in separately.

As Jakub pointed out, it conflicts with the latest net-next, but does
apply cleanly on the latest mainline, so I tested there (on a SA8775P
board running the SCMI firmware).

The two NICs come up as expected. Basic iperf3 throughput and jitter
tests look good. I would offer a Tested-by tag and a summary of the
test results, but I think it's a moot point because you'll have to
submit a new version anyway.

I will wait for you to rebase, then test again and come back with the
results.

-- 
Best regards,
Radu