[PATCH phy-next 15/22] drm: bridge: cdns-mhdp8546: use consumer API for getting PHY bus width
STALE210d
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: 2026-03-04 18:00:42
Also in:
dri-devel, linux-arm-kernel, linux-arm-msm, linux-can, linux-gpio, linux-ide, linux-media, linux-pci, linux-phy, linux-renesas-soc, linux-riscv, linux-rockchip, linux-samsung-soc, linux-sunxi, linux-tegra, linux-usb, lkml, spacemit
Subsystem:
drm drivers, drm drivers and misc gpu patches, drm drivers for bridge chips, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Andrzej Hajda, Neil Armstrong, Robert Foss, Linus Torvalds
The Cadence MHDP8546 DP bridge driver gets the PHY bus_width attribute
(holding number of lanes) directly, but doing this will no longer be
possible after the definition of struct phy is hidden from consumers.
Use the phy_get_bus_width() API function designed specifically for
consumers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
---
drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index ed7ed82ddb64..e3f8a281f147 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -1304,7 +1304,7 @@ static void cdns_mhdp_fill_host_caps(struct cdns_mhdp_device *mhdp)
/* Get source capabilities based on PHY attributes */
- mhdp->host.lanes_cnt = mhdp->phy->attrs.bus_width;
+ mhdp->host.lanes_cnt = phy_get_bus_width(mhdp->phy);
if (!mhdp->host.lanes_cnt)
mhdp->host.lanes_cnt = 4;
--
2.43.0