[PATCH bpf v4 8/9] net: enetc: use truesize as XDP RxQ info frag_size
From: Larysa Zaremba <hidden>
Date: 2026-03-02 16:49:56
Also in:
bpf, imx, intel-wired-lan, linux-kselftest, lkml
Subsystem:
freescale enetc ethernet drivers, networking drivers, the rest · Maintainers:
Claudiu Manoil, Vladimir Oltean, Wei Fang, Clark Wang, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects truesize instead of DMA
write size. Different assumptions in enetc driver configuration lead to
negative tailroom.
Set frag_size to the same value as frame_sz.
Fixes: 2768b2e2f7d2 ("net: enetc: register XDP RX queues with frag_size")
Reviewed-by: Aleksandr Loktionov <redacted>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Larysa Zaremba <redacted>
---
drivers/net/ethernet/freescale/enetc/enetc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index 70768392912c..a146ceaf2ed6 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c@@ -3467,7 +3467,7 @@ static int enetc_int_vector_init(struct enetc_ndev_priv *priv, int i, priv->rx_ring[i] = bdr; err = __xdp_rxq_info_reg(&bdr->xdp.rxq, priv->ndev, i, 0, - ENETC_RXB_DMA_SIZE_XDP); + ENETC_RXB_TRUESIZE); if (err) goto free_vector;
--
2.52.0