On Thu, Feb 26, 2026 at 11:03:16AM +0000, Conor Dooley wrote:

From: Conor Dooley <conor.dooley@microchip.com>

In increment mode, the tsu clock for the macb is provided separately to
the pck, usually the same clock as the reference to the rtc provided by
an off-chip oscillator. pclk is 150 MHz typically, and the reference is
either 100 MHz or 125 MHz, so having the tsu clock is required for
correct rate selection.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 arch/riscv/boot/dts/microchip/Makefile.orig | 26 +++++++++++++++++++++

Of course I noticed this only after sending, but this patch isn't for
net anyway so it's kinda moot and I could fix it myself on application
or in the likely v3.