[PATCH v6 1/4] dt-bindings: net: ethernet-phy: add property enet-phy-pair-order
From: Damien Dejean <hidden>
Date: 2026-02-07 09:25:44
Also in:
linux-devicetree, lkml
Subsystem:
ethernet phy library, networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add property enet-phy-pair-order to the device tree bindings to define the pair order of the PHY. To simplify PCB design some manufacturers allow to wire the pairs in a reverse order, and change the order in software. The property can be set to 0 to force the normal pair order (ABCD), or 1 to force the reverse pair order (DCBA). Signed-off-by: Damien Dejean <redacted> --- Documentation/devicetree/bindings/net/ethernet-phy.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 58634fee9fc4..4a27547f7d7a 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml@@ -126,6 +126,12 @@ properties: e.g. wrong bootstrap configuration caused by issues in PCB layout design. + enet-phy-pair-order: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + For normal (0) or reverse (1) order of the pairs (ABCD -> DCBA). + eee-broken-100tx: $ref: /schemas/types.yaml#/definitions/flag description:
--
2.47.3