Thread (12 messages) 12 messages, 4 authors, 2026-02-05
STALE140d

[PATCH net-next v8 6/6] can: gw: use can_gw_hops instead of sk_buff::csum_start

From: Oliver Hartkopp via B4 Relay <devnull+socketcan.hartkopp.net@kernel.org>
Date: 2026-02-01 14:33:41
Also in: b4-sent, linux-can, lkml
Subsystem: can network drivers, can network layer, the rest · Maintainers: Marc Kleine-Budde, Vincent Mailhol, Oliver Hartkopp, Linus Torvalds

From: Oliver Hartkopp <socketcan@hartkopp.net>

As CAN skbs don't use IP checksums the skb->csum_start variable was used to
store the can-gw CAN frame time-to-live counter together with
skb->ip_summed set to CHECKSUM_UNNECESSARY.

Remove the 'hack' using the skb->csum_start variable and move the content
to can_skb_ext::can_gw_hops of the CAN skb extensions.

The module parameter 'max_hops' has been reduced to a single byte to fit
can_skb_ext::can_gw_hops as the maximum value to be stored is 6.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
---
 drivers/net/can/vxcan.c |  2 +-
 net/can/gw.c            | 23 ++++++-----------------
 2 files changed, 7 insertions(+), 18 deletions(-)
diff --git a/drivers/net/can/vxcan.c b/drivers/net/can/vxcan.c
index ac2211f8070c..e882250180ef 100644
--- a/drivers/net/can/vxcan.c
+++ b/drivers/net/can/vxcan.c
@@ -75,11 +75,11 @@ static netdev_tx_t vxcan_xmit(struct sk_buff *oskb, struct net_device *dev)
 		kfree_skb(skb);
 		goto out_unlock;
 	}
 
 	/* reset CAN GW hop counter */
-	skb->csum_start = 0;
+	csx->can_gw_hops = 0;
 	skb->pkt_type   = PACKET_BROADCAST;
 	skb->dev        = peer;
 	skb->ip_summed  = CHECKSUM_UNNECESSARY;
 
 	len = can_skb_get_data_len(skb);
diff --git a/net/can/gw.c b/net/can/gw.c
index 816154a978c1..61a1e6b1b83f 100644
--- a/net/can/gw.c
+++ b/net/can/gw.c
@@ -69,12 +69,12 @@ MODULE_ALIAS(CAN_GW_NAME);
 
 #define CGW_MIN_HOPS 1
 #define CGW_MAX_HOPS 6
 #define CGW_DEFAULT_HOPS 1
 
-static unsigned int max_hops __read_mostly = CGW_DEFAULT_HOPS;
-module_param(max_hops, uint, 0444);
+static unsigned char max_hops __read_mostly = CGW_DEFAULT_HOPS;
+module_param(max_hops, byte, 0444);
 MODULE_PARM_DESC(max_hops,
 		 "maximum " CAN_GW_NAME " routing hops for CAN frames "
 		 "(valid values: " __stringify(CGW_MIN_HOPS) "-"
 		 __stringify(CGW_MAX_HOPS) " hops, "
 		 "default: " __stringify(CGW_DEFAULT_HOPS) ")");
@@ -478,23 +478,12 @@ static void can_can_gw_rcv(struct sk_buff *skb, void *data)
 		return;
 
 	/* Do not handle CAN frames routed more than 'max_hops' times.
 	 * In general we should never catch this delimiter which is intended
 	 * to cover a misconfiguration protection (e.g. circular CAN routes).
-	 *
-	 * The Controller Area Network controllers only accept CAN frames with
-	 * correct CRCs - which are not visible in the controller registers.
-	 * According to skbuff.h documentation the csum_start element for IP
-	 * checksums is undefined/unused when ip_summed == CHECKSUM_UNNECESSARY.
-	 * Only CAN skbs can be processed here which already have this property.
 	 */
-
-#define cgw_hops(skb) ((skb)->csum_start)
-
-	BUG_ON(skb->ip_summed != CHECKSUM_UNNECESSARY);
-
-	if (cgw_hops(skb) >= max_hops) {
+	if (csx->can_gw_hops >= max_hops) {
 		/* indicate deleted frames due to misconfiguration */
 		gwj->deleted_frames++;
 		return;
 	}
 
@@ -534,15 +523,15 @@ static void can_can_gw_rcv(struct sk_buff *skb, void *data)
 		gwj->dropped_frames++;
 		return;
 	}
 
 	/* put the incremented hop counter in the cloned skb */
-	cgw_hops(nskb) = cgw_hops(skb) + 1;
+	ncsx->can_gw_hops = csx->can_gw_hops + 1;
 
 	/* first processing of this CAN frame -> adjust to private hop limit */
-	if (gwj->limit_hops && cgw_hops(nskb) == 1)
-		cgw_hops(nskb) = max_hops - gwj->limit_hops + 1;
+	if (gwj->limit_hops && ncsx->can_gw_hops == 1)
+		ncsx->can_gw_hops = max_hops - gwj->limit_hops + 1;
 
 	nskb->dev = gwj->dst.dev;
 
 	/* pointer to modifiable CAN frame */
 	cf = (struct canfd_frame *)nskb->data;
-- 
2.51.0

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help