[PATCH net-next v2 1/3] dt-bindings: net: dsa: lantiq,gswip: reference common PHY properties
DORMANTno replies
From: Daniel Golle <daniel@makrotopia.org>
Date: 2026-01-30 00:49:37
Also in:
linux-devicetree, lkml
Subsystem:
lantiq / maxlinear / intel ethernet dsa drivers, networking drivers, networking [dsa], open firmware and flattened device tree bindings, the rest · Maintainers:
Hauke Mehrtens, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Reference the common PHY properties so RX and TX SerDes lane polarity of the SGMII/1000Base-X/2500Base-X PCS can be configured. Signed-off-by: Daniel Golle <daniel@makrotopia.org> --- v2: use allOf to include PHY common properties, add example use Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
index f601e5f9fa6a..b4a31cde4322 100644
--- a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml@@ -105,6 +105,8 @@ patternProperties: patternProperties: "^(ethernet-)?port@[0-6]$": $ref: dsa-port.yaml# + allOf: + - $ref: /schemas/phy/phy-common-props.yaml# unevaluatedProperties: false properties:
@@ -288,6 +290,7 @@ examples: - | #include <dt-bindings/leds/common.h> + #include <dt-bindings/phy/phy.h> mdio { #address-cells = <1>;
@@ -320,6 +323,7 @@ examples: label = "wan"; phy-mode = "1000base-x"; managed = "in-band-status"; + rx-polarity = <PHY_POL_INVERT>; }; port@5 {
--
2.52.0