[PATCH net-next V7 14/14] net/mlx5: Document devlink rates
From: Tariq Toukan <tariqt@nvidia.com>
Date: 2026-01-28 11:29:06
Also in:
linux-doc, linux-rdma, lkml
Subsystem:
documentation, networking [general], the rest · Maintainers:
Jonathan Corbet, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Cosmin Ratiu <redacted> It seems rates were not documented in the mlx5-specific file, so add examples on how to limit VFs and groups and also provide an example of the intended way to achieve cross-esw scheduling. Signed-off-by: Cosmin Ratiu <redacted> Reviewed-by: Carolina Jubran <redacted> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> --- Documentation/networking/devlink/mlx5.rst | 33 +++++++++++++++++++++++ 1 file changed, 33 insertions(+)
diff --git a/Documentation/networking/devlink/mlx5.rst b/Documentation/networking/devlink/mlx5.rst
index 4bba4d780a4a..62c4d7bf0877 100644
--- a/Documentation/networking/devlink/mlx5.rst
+++ b/Documentation/networking/devlink/mlx5.rst@@ -419,3 +419,36 @@ User commands examples: .. note:: This command can run over all interfaces such as PF/VF and representor ports. + +Rates +===== + +mlx5 devices can limit transmission of individual VFs or a group of them via +the devlink-rate API in switchdev mode. + +User commands examples: + +- Print the existing rates:: + + $ devlink port function rate show + +- Set a max tx limit on traffic from VF0:: + + $ devlink port function rate set pci/0000:82:00.0/1 tx_max 10Gbit + +- Create a rate group with a max tx limit and adding two VFs to it:: + + $ devlink port function rate add pci/0000:82:00.0/group1 tx_max 10Gbit + $ devlink port function rate set pci/0000:82:00.0/1 parent group1 + $ devlink port function rate set pci/0000:82:00.0/2 parent group1 + +- Same scenario, with a min guarantee of 20% of the bandwidth for the first VFs:: + + $ devlink port function rate add pci/0000:82:00.0/group1 tx_max 10Gbit + $ devlink port function rate set pci/0000:82:00.0/1 parent group1 tx_share 2Gbit + $ devlink port function rate set pci/0000:82:00.0/2 parent group1 + +- Cross-device scheduling:: + + $ devlink port function rate add pci/0000:82:00.0/group1 tx_max 10Gbit + $ devlink port function rate set pci/0000:82:00.1/32769 parent pci/0000:82:00.0/group1
--
2.44.0