Add initial support for ethernet controller of the Spacemit K3 SoC.
This ethernet controller is almost a standard Synopsys DesignWare
MAC (version 5.40a). This controller require a syscon device to
configure some basic features, like interface type and internal delay.

Inochi Amaoto (3):
  dt-bindings: net: Add support for Spacemit K3 dwmac
  net: stmmac: platform: Add snps,dwmac-5.40a IP compatible string
  net: stmmac: Add glue layer for Spacemit K3 SoC

 .../devicetree/bindings/net/snps,dwmac.yaml   |   3 +
 .../bindings/net/spacemit,k3-dwmac.yaml       | 107 +++++++++
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |  12 +
 drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
 .../ethernet/stmicro/stmmac/dwmac-spacemit.c  | 224 ++++++++++++++++++
 .../ethernet/stmicro/stmmac/stmmac_platform.c |   1 +
 6 files changed, 348 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/spacemit,k3-dwmac.yaml
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c

--
2.52.0