[PATCH 2/2] net: sfp: support 25G long-range modules (extended compliance code 0x3)
From: Josua Mayer <hidden>
Date: 2026-01-18 14:08:10
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, sff/sfp/sfp+ module support, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Russell King, Linus Torvalds
The extended compliance code value SFF8024_ECC_100GBASE_ER4_25GBASE_ER (0x3) means either 4-lane 100G or single lane 25G. Set 25000baseLR_Full mode supported in addition to the already set 100000baseLR4_ER4_Full, and handle it in sfp_select_interface. This fixes detection of 25G capability for two SFP fiber modules: - GigaLight GSS-SPO250-LRT - FS SFP-25G23-BX20-I Signed-off-by: Josua Mayer <redacted> --- drivers/net/phy/sfp-bus.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index b945d75966d5..2caa0e0c4ec8 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c@@ -247,6 +247,7 @@ static void sfp_module_parse_support(struct sfp_bus *bus, case SFF8024_ECC_100GBASE_LR4_25GBASE_LR: case SFF8024_ECC_100GBASE_ER4_25GBASE_ER: phylink_set(modes, 100000baseLR4_ER4_Full); + phylink_set(modes, 25000baseLR_Full); break; case SFF8024_ECC_100GBASE_CR4: phylink_set(modes, 100000baseCR4_Full);
@@ -342,7 +343,8 @@ phy_interface_t sfp_select_interface(struct sfp_bus *bus, { if (phylink_test(link_modes, 25000baseCR_Full) || phylink_test(link_modes, 25000baseKR_Full) || - phylink_test(link_modes, 25000baseSR_Full)) + phylink_test(link_modes, 25000baseSR_Full) || + phylink_test(link_modes, 25000baseLR_Full)) return PHY_INTERFACE_MODE_25GBASER; if (phylink_test(link_modes, 10000baseCR_Full) ||
--
2.43.0