Re: [PATCH net-next 3/5] net: phy: realtek: reunify C22 and C45 drivers

On Fri, Jan 09, 2026 at 02:18:14PM +0100, Andrew Lunn wrote:

On Fri, Jan 09, 2026 at 03:03:33AM +0000, Daniel Golle wrote:

quoted

Reunify the split C22/C45 drivers for the RTL8221B-VB-CG 2.5Gbps and
RTL8221B-VM-CG 2.5Gbps PHYs back into a single driver.
This is possible now by using all the driver operations previously used
by the C45 driver, as transparent access to all MMDs including
MDIO_MMD_VEND2 is now possible also over Clause-22 MDIO.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 drivers/net/phy/realtek/realtek_main.c | 72 ++++++--------------------
 1 file changed, 16 insertions(+), 56 deletions(-)

diff --git a/drivers/net/phy/realtek/realtek_main.c b/drivers/net/phy/realtek/realtek_main.c
index 886694ff995f6..d07d60bc1ce34 100644
--- a/drivers/net/phy/realtek/realtek_main.c
+++ b/drivers/net/phy/realtek/realtek_main.c

@@ -1879,28 +1879,18 @@ static int rtl8221b_match_phy_device(struct phy_device *phydev,
 	return phydev->phy_id == RTL_8221B && rtlgen_supports_mmd(phydev);
 }
 
-static int rtl8221b_vb_cg_c22_match_phy_device(struct phy_device *phydev,
-					       const struct phy_driver *phydrv)
+static int rtl8221b_vb_cg_match_phy_device(struct phy_device *phydev,
+					   const struct phy_driver *phydrv)
 {
-	return rtlgen_is_c45_match(phydev, RTL_8221B_VB_CG, false);
+	return rtlgen_is_c45_match(phydev, RTL_8221B_VB_CG, true) ||
+	       rtlgen_is_c45_match(phydev, RTL_8221B_VB_CG, false);

Are there any calls left to rtlgen_is_c45_match() which don't || true
and false? If not, maybe add another patch which removes the bool
parameter?

At this point it is still used by
---
static int rtl8251b_c45_match_phy_device(struct phy_device *phydev,
                                         const struct phy_driver *phydrv)
{
        return rtlgen_is_c45_match(phydev, RTL_8251B, true);
}
---

This 5G PHY supposedly supports only C45 mode, I don't know if it
actually needs the .match_phy_device at all or could also simply use
PHY_ID_MATCH_EXACT(RTL_8251B) instead, I don't have any device using
it so I can't test that.