after resume dev_watchdog() message:
"NETDEV WATCHDOG: CPU: x: transmit queue x timed out xx ms"

The trigging scenario is as follows:

When the TSO function sets tx_skbuff_dma[tx_q->cur_tx].last_segment = true

, and the last_segment value is not cleared in stmmac_free_tx_buffer after

 resume, restarting TSO transmission may incorrectly use

tx_q->tx_skbuff_dma[first_entry].last_segment = true for a new TSO packet.

When the tx queue has timed out, and the emac TX descriptor is as follows:
eth0: 221 [0x0000000876d10dd0]: 0x73660cbe 0x8 0x42 0xb04416a0
eth0: 222 [0x0000000876d10de0]: 0x77731d40 0x8 0x16a0 0x90000000

Descriptor 221 is the TSO header, and descriptor 222 is the TSO payload.

In the tdes3 (0xb04416a0), bit 29 (first descriptor) and bit 28

(last descriptor) of the TSO packet 221 DMA descriptor cannot both be

set to 1 simultaneously. Since descriptor 222 is the actual last

descriptor, failing to set it properly will cause the EMAC DMA to stop

and hang.

To solve the issue, set last_segment to false in stmmac_free_tx_buffer:
tx_q->tx_skbuff_dma[i].last_segment = false;
Set last_segment to false in stmmac_tso_xmit, and do not use the default
 value: tx_q->tx_skbuff_dma[first_entry].last_segment = false;
This will prevent similar issues from occurring in the future.

Signed-off-by: Tao Wang <redacted>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index b3730312aeed..d786ac3c78f7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -1653,6 +1653,7 @@ static void stmmac_free_tx_buffer(struct stmmac_priv *priv,
 
 	tx_q->tx_skbuff_dma[i].buf = 0;
 	tx_q->tx_skbuff_dma[i].map_as_page = false;
+	tx_q->tx_skbuff_dma[i].last_segment = false;
 }
 
 /**

@@ -4448,6 +4449,7 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (dma_mapping_error(priv->device, des))
 		goto dma_map_err;
 
+	tx_q->tx_skbuff_dma[first_entry].last_segment = false;
 	stmmac_set_desc_addr(priv, first, des);
 	stmmac_tso_allocator(priv, des + proto_hdr_len, pay_len,
 			     (nfrags == 0), queue);

-- 
2.34.1