[PATCH net] net: phy: motorcomm: fix duplex setting error for phy leds
From: Jijie Shao <shaojijie@huawei.com>
Date: 2026-01-08 07:15:29
Also in:
lkml
Subsystem:
ethernet phy library, motorcomm phy driver, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Frank, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
fix duplex setting error for phy leds
Fixes: 355b82c54c12 ("net: phy: motorcomm: Add support for PHY LEDs on YT8521")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
---
drivers/net/phy/motorcomm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index 89b5b19a9bd2..42d46b5758fc 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c@@ -1741,10 +1741,10 @@ static int yt8521_led_hw_control_set(struct phy_device *phydev, u8 index, val |= YT8521_LED_1000_ON_EN; if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules)) - val |= YT8521_LED_HDX_ON_EN; + val |= YT8521_LED_FDX_ON_EN; if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules)) - val |= YT8521_LED_FDX_ON_EN; + val |= YT8521_LED_HDX_ON_EN; if (test_bit(TRIGGER_NETDEV_TX, &rules) || test_bit(TRIGGER_NETDEV_RX, &rules))
--
2.33.0