[PATCH v2 2/2] dt-bindings: net: adi,adin: document LP Termination property
From: Osose Itua <hidden>
Date: 2025-12-22 22:22:45
Also in:
linux-devicetree, lkml
Subsystem:
analog devices inc adin driver, networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Michael Hennerich, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add "adi,low-cmode-impedance" boolean property which, when present, configures the PHY for the lowest common-mode impedance on the receive pair for 100BASE-TX operation. Signed-off-by: Osose Itua <redacted> --- Documentation/devicetree/bindings/net/adi,adin.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
index c425a9f1886d..d3c8c5cc4bb1 100644
--- a/Documentation/devicetree/bindings/net/adi,adin.yaml
+++ b/Documentation/devicetree/bindings/net/adi,adin.yaml@@ -52,6 +52,12 @@ properties: description: Enable 25MHz reference clock output on CLK25_REF pin. type: boolean + adi,low-cmode-impedance: + description: | + Ability to configure for the lowest common-mode impedance on the + receive pair for 100BASE-TX. + type: boolean + unevaluatedProperties: false examples: