[PATCH net-next v3 1/3] net: phy: motorcomm: Support YT8531S PHY in YT6801 Ethernet controller

YT6801's internal PHY is confirmed as a GMII-capable variant of YT8531S
by a previous series[1] and reading PHY ID. Add support for
PHY_INTERFACE_MODE_GMII for YT8531S to allow the Ethernet driver to
reuse the PHY code for its internal PHY.

Link: https://lore.kernel.org/all/a48d76ac-db08-46d5-9528-f046a7b541dc@motor-comm.com/ (local) # [1]
Co-developed-by: Frank Sae <Frank.Sae@motor-comm.com>
Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
Signed-off-by: Yao Zi <redacted>
---
 drivers/net/phy/motorcomm.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index 89b5b19a9bd2..b751fbc6711a 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c

@@ -910,6 +910,10 @@ static int ytphy_rgmii_clk_delay_config(struct phy_device *phydev)
 		val |= FIELD_PREP(YT8521_RC1R_RX_DELAY_MASK, rx_reg) |
 		       FIELD_PREP(YT8521_RC1R_GE_TX_DELAY_MASK, tx_reg);
 		break;
+	case PHY_INTERFACE_MODE_GMII:
+		if (phydev->drv->phy_id != PHY_ID_YT8531S)
+			return -EOPNOTSUPP;
+		break;
 	default: /* do not support other modes */
 		return -EOPNOTSUPP;
 	}

-- 
2.51.2