Re: [PATCH net V3 1/2] veth: enable dev_watchdog for detecting stalled TXQs

From
Jakub Kicinski <kuba@kernel.org>
Date
2025-11-07 01:29:21
Also in
bpf, linux-arm-kernel, lkml
Reply to
Jesper Dangaard Brouer, 2025-11-05
On Wed, 05 Nov 2025 18:28:12 +0100 Jesper Dangaard Brouer wrote:
The changes introduced in commit dc82a33297fc ("veth: apply qdisc
backpressure on full ptr_ring to reduce TX drops") have been found to cause
a race condition in production environments.

Under specific circumstances, observed exclusively on ARM64 (aarch64)
systems with Ampere Altra Max CPUs, a transmit queue (TXQ) can become
permanently stalled. This happens when the race condition leads to the TXQ
entering the QUEUE_STATE_DRV_XOFF state without a corresponding queue wake-up,
preventing the attached qdisc from dequeueing packets and causing the
network link to halt.

As a first step towards resolving this issue, this patch introduces a
failsafe mechanism. It enables the net device watchdog by setting a timeout
value and implements the .ndo_tx_timeout callback.

If a TXQ stalls, the watchdog will trigger the veth_tx_timeout() function,
which logs a warning and calls netif_tx_wake_queue() to unstall the queue
and allow traffic to resume.

The log message will look like this:

 veth42: NETDEV WATCHDOG: CPU: 34: transmit queue 0 timed out 5393 ms
 veth42: veth backpressure stalled(n:1) TXQ(0) re-enable

This provides a necessary recovery mechanism while the underlying race
condition is investigated further. Subsequent patches will address the root
cause and add more robust state handling.

Fixes: dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops")
Reviewed-by: Toke Høiland-Jørgensen <redacted>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
I think this belongs in net-next.. Fail safe is not really a bug fix.
I'm slightly worried we're missing a corner case and will cause
timeouts to get printed for someone's config.
quoted hunk ↗ jump to hunk
+static void veth_tx_timeout(struct net_device *dev, unsigned int txqueue)
+{
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, txqueue);
+
+	netdev_err(dev, "veth backpressure stalled(n:%ld) TXQ(%u) re-enable\n",
+		   atomic_long_read(&txq->trans_timeout), txqueue);
If you think the trans_timeout is useful, let's add it to the message
core prints? And then we can make this msg just veth specific, I don't
think we should be repeating what core already printed.
quoted hunk ↗ jump to hunk
+	netif_tx_wake_queue(txq);
+}
+
 static int veth_open(struct net_device *dev)
 {
 	struct veth_priv *priv = netdev_priv(dev);
@@ -1711,6 +1723,7 @@ static const struct net_device_ops veth_netdev_ops = {
 	.ndo_bpf		= veth_xdp,
 	.ndo_xdp_xmit		= veth_ndo_xdp_xmit,
 	.ndo_get_peer_dev	= veth_peer_dev,
+	.ndo_tx_timeout		= veth_tx_timeout,
 };
 
 static const struct xdp_metadata_ops veth_xdp_metadata_ops = {
@@ -1749,6 +1762,7 @@ static void veth_setup(struct net_device *dev)
 	dev->priv_destructor = veth_dev_free;
 	dev->pcpu_stat_type = NETDEV_PCPU_STAT_TSTATS;
 	dev->max_mtu = ETH_MAX_MTU;
+	dev->watchdog_timeo = msecs_to_jiffies(5000);
 
 	dev->hw_features = VETH_FEATURES;
 	dev->hw_enc_features = VETH_FEATURES;
  
Thread (8 messages) 8 messages, 3 authors, last reply 2025-11-12
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help