[PATCH v4 0/8] net: stmmac: qcom-ethqos: add support for SCMI power domains
From: Bartosz Golaszewski <hidden>
Date: 2025-11-04 13:09:07
Also in:
imx, linux-amlogic, linux-arm-msm, linux-devicetree, linux-mips, linux-renesas-soc, linux-riscv, linux-rockchip, linux-sunxi, lkml
Add support for the firmware-managed variant of the DesignWare MAC on the sa8255p platform. This series contains new DT bindings and driver changes required to support the MAC in the STMMAC driver. It also reorganizes the ethqos code quite a bit to make the introduction of power domains into the driver a bit easier on the eye. The DTS changes will go in separately. Signed-off-by: Bartosz Golaszewski <redacted> --- Changes in v4: - Remove the phys property from the SCMI bindings - Mark the power-domain-names property as required - Set maxItems for power-domains to 1 for all existing bindings to maintain the current requirements after modifying the value in the top-level document - Link to v3: https://lore.kernel.org/r/20251027-qcom-sa8255p-emac-v3-0-75767b9230ab@linaro.org (local) Changes in v3: - Drop 'power' and 'perf' prefixes from power domain names - Rebase on top of Russell's changes to dwmac - Rebase on top of even more changes from Russell that are not yet in next (E1vB6ld-0000000BIPy-2Qi4@rmk-PC.armlinux.org.uk) - Link to v2: https://lore.kernel.org/all/20251008-qcom-sa8255p-emac-v2-0-92bc29309fce@linaro.org/ (local) Changes in v2: - Fix the power-domains property in DT bindings - Rework the DT bindings example - Drop the DTS patch, it will go upstream separately - Link to v1: https://lore.kernel.org/r/20250910-qcom-sa8255p-emac-v1-0-32a79cf1e668@linaro.org (local) --- Bartosz Golaszewski (8): dt-bindings: net: qcom: document the ethqos device for SCMI-based systems net: stmmac: qcom-ethqos: use generic device properties net: stmmac: qcom-ethqos: improve typing in devres callback net: stmmac: qcom-ethqos: wrap emac driver data in additional structure net: stmmac: qcom-ethqos: split power management fields into a separate structure net: stmmac: qcom-ethqos: split power management context into a separate struct net: stmmac: qcom-ethqos: define a callback for setting the serdes speed net: stmmac: qcom-ethqos: add support for sa8255p .../bindings/net/allwinner,sun7i-a20-gmac.yaml | 3 + .../bindings/net/altr,socfpga-stmmac.yaml | 3 + .../bindings/net/amlogic,meson-dwmac.yaml | 3 + .../devicetree/bindings/net/eswin,eic7700-eth.yaml | 3 + .../devicetree/bindings/net/intel,dwmac-plat.yaml | 3 + .../bindings/net/loongson,ls1b-gmac.yaml | 3 + .../bindings/net/loongson,ls1c-emac.yaml | 3 + .../devicetree/bindings/net/nxp,dwmac-imx.yaml | 3 + .../devicetree/bindings/net/nxp,lpc1850-dwmac.yaml | 3 + .../devicetree/bindings/net/nxp,s32-dwmac.yaml | 3 + .../devicetree/bindings/net/qcom,ethqos-scmi.yaml | 97 ++++++ .../devicetree/bindings/net/qcom,ethqos.yaml | 3 + .../devicetree/bindings/net/renesas,rzn1-gmac.yaml | 3 + .../bindings/net/renesas,rzv2h-gbeth.yaml | 3 + .../devicetree/bindings/net/rockchip-dwmac.yaml | 3 + .../devicetree/bindings/net/snps,dwmac.yaml | 5 +- .../bindings/net/sophgo,cv1800b-dwmac.yaml | 3 + .../bindings/net/sophgo,sg2044-dwmac.yaml | 3 + .../bindings/net/starfive,jh7110-dwmac.yaml | 3 + .../devicetree/bindings/net/stm32-dwmac.yaml | 3 + .../devicetree/bindings/net/tesla,fsd-ethqos.yaml | 3 + .../devicetree/bindings/net/thead,th1520-gmac.yaml | 3 + .../bindings/net/toshiba,visconti-dwmac.yaml | 3 + MAINTAINERS | 1 + drivers/net/ethernet/stmicro/stmmac/Kconfig | 2 +- .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 342 +++++++++++++++++---- 26 files changed, 447 insertions(+), 63 deletions(-) --- base-commit: 9823120909776bbca58a3c55ef1f27d49283c1f3 change-id: 20250704-qcom-sa8255p-emac-8460235ac512 Best regards, -- Bartosz Golaszewski [off-list ref]