[PATCH net-next 10/13] can: m_can: m_can_interrupt_enable(): use m_can_write() instead of open coding it
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: 2025-10-17 15:08:37
Also in:
linux-can
Subsystem:
can network drivers, mcan device driver, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Markus Schneider-Pargmann, Linus Torvalds
As everywhere else in the driver, use m_can_write() instead of open coding it. Link: https://patch.msgid.link/20251008-m_can-cleanups-v1-4-1784a18eaa84@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- drivers/net/can/m_can/m_can.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 6aef5e771fc3..98e7ab612bba 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c@@ -452,7 +452,7 @@ static void m_can_interrupt_enable(struct m_can_classdev *cdev, u32 interrupts) { if (cdev->active_interrupts == interrupts) return; - cdev->ops->write_reg(cdev, M_CAN_IE, interrupts); + m_can_write(cdev, M_CAN_IE, interrupts); cdev->active_interrupts = interrupts; }
--
2.51.0