Thread (11 messages) 11 messages, 3 authors, 2025-09-24
STALE287d

[PATCH net 4/7] can: hi311x: populate ndo_change_mtu() to prevent buffer overflow

From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: 2025-09-23 07:42:58
Also in: linux-can
Subsystem: can network drivers, the rest · Maintainers: Marc Kleine-Budde, Vincent Mailhol, Linus Torvalds

From: Vincent Mailhol <mailhol@kernel.org>

Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.

Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:

  $ ip link set can0 mtu 9999

After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:

	socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))

to inject a malicious CAN XL frames. For example:

	struct canxl_frame frame = {
		.flags = 0xff,
		.len = 2048,
	};

The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:

  1. the skb->protocol is set to ETH_P_CANXL which is valid (the
     function does not check the actual device capabilities).

  2. the length is a valid CAN XL length.

And so, hi3110_hard_start_xmit() receives a CAN XL frame which it is
not able to correctly handle and will thus misinterpret it as a CAN
frame. The driver will consume frame->len as-is with no further
checks.

This can result in a buffer overflow later on in hi3110_hw_tx() on
this line:

	memcpy(buf + HI3110_FIFO_EXT_DATA_OFF,
	       frame->data, frame->len);

Here, frame->len corresponds to the flags field of the CAN XL frame.
In our previous example, we set canxl_frame->flags to 0xff. Because
the maximum expected length is 8, a buffer overflow of 247 bytes
occurs!

Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow.

Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-2-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/hi311x.c | 1 +
 1 file changed, 1 insertion(+)
diff --git a/drivers/net/can/spi/hi311x.c b/drivers/net/can/spi/hi311x.c
index 96bef8f384c4..963ea8510dd9 100644
--- a/drivers/net/can/spi/hi311x.c
+++ b/drivers/net/can/spi/hi311x.c
@@ -799,6 +799,7 @@ static const struct net_device_ops hi3110_netdev_ops = {
 	.ndo_open = hi3110_open,
 	.ndo_stop = hi3110_stop,
 	.ndo_start_xmit = hi3110_hard_start_xmit,
+	.ndo_change_mtu = can_change_mtu,
 };
 
 static const struct ethtool_ops hi3110_ethtool_ops = {
-- 
2.51.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help