On Sun, 28 Sep 2025 10:02:43 +0800
Dust Li [off-list ref] wrote:

quoted

Unfortunately I don't quite understand why qp_attr.cap.max_send_wr is 3
times the number of send WR buffers we allocate. My understanding
is that qp_attr.cap.max_send_wr is about the number of send WQEs.  

We have at most 2 RDMA Write for 1 RDMA send. So 3 times is necessary.
That is explained in the original comments. Maybe it's better to keep it.

.cap = {
                /* include unsolicited rdma_writes as well,
                 * there are max. 2 RDMA_WRITE per 1 WR_SEND
                 */

But what are "the unsolicited" rdma_writes? I have heard of
unsolicited receive, where the data is received without
consuming a WR previously put on the RQ on the receiving end, but
the concept of unsolicited rdma_writes eludes me completely.

I guess what you are trying to say, and what I understand is
that we first put the payload into the RMB of the remote, which
may require up 2 RDMA_WRITE operations, probably because we may
cross the end (and start) of the array that hosts the circular
buffer, and then we send a CDC message to update the cursor.

For the latter a  ib_post_send() is used in smc_wr_tx_send()
and AFAICT it consumes a WR from wr_tx_bufs. For the former
we consume a single wr_tx_rdmas which and each wr_tx_rdmas
has 2 WR allocated.

And all those WRs need a WQE. So I guess now I do understand
SMC_WR_BUF_CNT, but I find the comment still confusing like
hell because of these unsolicited rdma_writes.

Thank you for the explanation! It was indeed helpful! Let
me try to come up with a better comment -- unless somebody
manages to explain "unsolicited rdma_writes" to me.

        .max_send_wr = SMC_WR_BUF_CNT * 3,
        .max_recv_wr = SMC_WR_BUF_CNT * 3,
        .max_send_sge = SMC_IB_MAX_SEND_SGE,
        .max_recv_sge = lnk->wr_rx_sge_cnt,
        .max_inline_data = 0,
},

>I assume that qp_attr.cap.max_send_wr == qp_attr.cap.max_recv_wr
>is not something we would want to preserve.  

IIUC, RDMA Write won't consume any RX wqe on the receive side, so I think
the .max_recv_wr can be SMC_WR_BUF_CNT if we don't use RDMA_WRITE_IMM.

Maybe we don't want to assume somebody else (another implementation)
would not use immediate data. I'm not sure. But I don't quite understand
the why the relationship between the send and the receive side either.

Regards,
Halil