On Wed, 24 Sep 2025 10:34:11 +0200, Jonas Rebmann wrote:

This series adds the Protonic PRT8ML device tree as well as some minor
corrections to the devicetree bindings used.

Signed-off-by: Jonas Rebmann <redacted>
---
Changes in v3:
- Add comment on the intentional limitation to 100Mbps RGMII
- Link to v2: https://lore.kernel.org/r/20250918-imx8mp-prt8ml-v2-0-3d84b4fe53de@pengutronix.de (local)

Changes in v2:
- Dropped "ASoC: dt-bindings: asahi-kasei,ak4458: Reference common DAI
  properties", applied to broonie/sound for-next (Thanks, Mark)
- Updated description of the reset-gpios property in sja1105 binding to
  address the issues of connecting this pin to GPIO (Thanks, Vladimir)
- Added the fec, switch and phy for RJ45 onboard ethernet after
  successful testing
- Consistently use interrupts-extended
- Link to v1: https://lore.kernel.org/r/20250910-imx8mp-prt8ml-v1-0-fd04aed15670@pengutronix.de (local)

---
Jonas Rebmann (3):
      dt-bindings: net: dsa: nxp,sja1105: Add reset-gpios property
      dt-bindings: arm: fsl: Add Protonic PRT8ML
      arm64: dts: add Protonic PRT8ML board

 Documentation/devicetree/bindings/arm/fsl.yaml     |   1 +
 .../devicetree/bindings/net/dsa/nxp,sja1105.yaml   |   9 +
 arch/arm64/boot/dts/freescale/Makefile             |   1 +
 arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dts    | 501 +++++++++++++++++++++
 4 files changed, 512 insertions(+)
---
base-commit: ea21fa34164c9ea0a2a5b8714c7e36f54c7fb46e
change-id: 20250701-imx8mp-prt8ml-01be34684659

Best regards,
--
Jonas Rebmann [off-list ref]

My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: using specified base-commit ea21fa34164c9ea0a2a5b8714c7e36f54c7fb46e

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/freescale/' for 20250924-imx8mp-prt8ml-v3-0-f498d7f71a94@pengutronix.de:

arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dtb: codec@11 (asahi-kasei,ak4458): '#sound-dai-cells' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/sound/asahi-kasei,ak4458.yaml#
arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dtb: isp@32e10000 (fsl,imx8mp-isp): 'power-domain-names' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/rockchip-isp1.yaml#
arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dtb: isp@32e10000 (fsl,imx8mp-isp): power-domains: [[77, 6], [77, 1]] is too long
	from schema $id: http://devicetree.org/schemas/media/rockchip-isp1.yaml#
arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dtb: isp@32e20000 (fsl,imx8mp-isp): 'power-domain-names' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/media/rockchip-isp1.yaml#
arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dtb: isp@32e20000 (fsl,imx8mp-isp): power-domains: [[77, 6], [77, 4]] is too long
	from schema $id: http://devicetree.org/schemas/media/rockchip-isp1.yaml#