Re: [PATCH net 3/3] net: hns3: use user configure after hardware reset when... | netdev | Ratatoskr

[PATCH net 0/3] There are some bugfix for the HNS3 ethernet driver · Jijie Shao <shaojijie@huawei.com> · 2025-09-17
[PATCH net 2/3] net: hns3: return error code when function fails · Jijie Shao <shaojijie@huawei.com> · 2025-09-17
[PATCH net 1/3] net: hns3: fix loopback test of serdes and phy is failed if duplex is half · Jijie Shao <shaojijie@huawei.com> · 2025-09-17
Re: [PATCH net 1/3] net: hns3: fix loopback test of serdes and phy is failed if duplex is half · Andrew Lunn <andrew@lunn.ch> · 2025-09-17
Re: [PATCH net 1/3] net: hns3: fix loopback test of serdes and phy is failed if duplex is half · Jijie Shao <shaojijie@huawei.com> · 2025-09-19
[PATCH net 3/3] net: hns3: use user configure after hardware reset when using kernel PHY · Jijie Shao <shaojijie@huawei.com> · 2025-09-17
Re: [PATCH net 3/3] net: hns3: use user configure after hardware reset when using kernel PHY · Andrew Lunn <andrew@lunn.ch> · 2025-09-17
Re: [PATCH net 3/3] net: hns3: use user configure after hardware reset when using kernel PHY · Jijie Shao <shaojijie@huawei.com> · 2025-09-19
Re: [PATCH net 3/3] net: hns3: use user configure after hardware reset when using kernel PHY · Andrew Lunn <andrew@lunn.ch> · 2025-09-19

Re: [PATCH net 3/3] net: hns3: use user configure after hardware reset when using kernel PHY

From: Andrew Lunn <andrew@lunn.ch>
Date: 2025-09-17 17:12:14
Also in: lkml

On Wed, Sep 17, 2025 at 08:29:54PM +0800, Jijie Shao wrote:

When a reset occurring

Why would a reset occur? Is it the firmware crashing?

Consider the case that reset was happened consecutively.

Does that mean the firmware crashed twice in quick succession?

     Andrew