Re: [PATCH net-next v12 1/5] net: rnpgbe: Add build support for rnpgbe

diff --git a/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c
new file mode 100644
index 000000000000..60bbc806f17b
--- /dev/null
+++ b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c

@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2020 - 2025 Mucse Corporation. */
+
+#include <linux/pci.h>
+
+#include "rnpgbe.h"
+
+static const char rnpgbe_driver_name[] = "rnpgbe";
+
+/* rnpgbe_pci_tbl - PCI Device ID Table
+ *
+ * { PCI_DEVICE(Vendor ID, Device ID),
+ *   driver_data (used for different hw chip) }
+ */
+static struct pci_device_id rnpgbe_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N500_QUAD_PORT),
+	  .driver_data = board_n500},
+	{ PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N500_DUAL_PORT),
+	  .driver_data = board_n500},
+	{ PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N210),
+	  .driver_data = board_n210},
+	{ PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N210L),
+	  .driver_data = board_n210},

+	/* required last entry */
+	{0, },
+};
+
+/**
+ * rnpgbe_probe - Device initialization routine
+ * @pdev: PCI device information struct
+ * @id: entry in rnpgbe_pci_tbl
+ *
+ * rnpgbe_probe initializes a PF adapter identified by a pci_dev
+ * structure.
+ *
+ * Return: 0 on success, negative errno on failure
+ **/
+static int rnpgbe_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int err;

+
+	err = pci_enable_device_mem(pdev);
+	if (err)
+		return err;
+
+	err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(56));
+	if (err) {
+		dev_err(&pdev->dev,
+			"No usable DMA configuration, aborting %d\n", err);
+		goto err_disable_dev;
+	}
+
+	err = pci_request_mem_regions(pdev, rnpgbe_driver_name);
+	if (err) {
+		dev_err(&pdev->dev,
+			"pci_request_selected_regions failed %d\n", err);
+		goto err_disable_dev;
+	}
+
+	pci_set_master(pdev);
+	err = pci_save_state(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "pci_save_state failed %d\n", err);
+		goto err_free_regions;
+	}
+
+	return 0;
+err_free_regions:
+	pci_release_mem_regions(pdev);
+err_disable_dev:
+	pci_disable_device(pdev);
+	return err;
+}
+
+/**
+ * rnpgbe_remove - Device removal routine
+ * @pdev: PCI device information struct
+ *
+ * rnpgbe_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. This could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void rnpgbe_remove(struct pci_dev *pdev)
+{
+	pci_release_mem_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+/**
+ * rnpgbe_dev_shutdown - Device shutdown routine
+ * @pdev: PCI device information struct
+ **/
+static void rnpgbe_dev_shutdown(struct pci_dev *pdev)
+{
+	pci_disable_device(pdev);
+}
+
+/**
+ * rnpgbe_shutdown - Device shutdown routine
+ * @pdev: PCI device information struct
+ *
+ * rnpgbe_shutdown is called by the PCI subsystem to alert the driver
+ * that os shutdown. Device should setup wakeup state here.
+ **/
+static void rnpgbe_shutdown(struct pci_dev *pdev)
+{
+	rnpgbe_dev_shutdown(pdev);