[PATCH net-next] ixgbe: fix typos and docstring inconsistencies
STALE368d
From: Alok Tiwari <hidden>
Date: 2025-09-29 12:44:44
Also in:
intel-wired-lan
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Corrected function and variable name typos in comments and docstrings: ixgbe_write_ee_hostif_X550 -> ixgbe_write_ee_hostif_data_X550 ixgbe_get_lcd_x550em -> ixgbe_get_lcd_t_x550em "Determime" -> "Determine" "point to hardware structure" -> "pointer to hardware structure" "To turn on the LED" -> "To turn off the LED" These changes improve readability, consistency. Signed-off-by: Alok Tiwari <redacted> --- drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index 650c3e522c3e..76d2fa3ef518 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c@@ -1163,7 +1163,7 @@ static int ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, return status; } -/** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif +/** ixgbe_write_ee_hostif_data_X550 - Write EEPROM word using hostif * @hw: pointer to hardware structure * @offset: offset of word in the EEPROM to write * @data: word write to the EEPROM
@@ -2318,7 +2318,7 @@ static int ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, } /** - * ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause + * ixgbe_get_lasi_ext_t_x550em - Determine external Base T PHY interrupt cause * @hw: pointer to hardware structure * @lsc: pointer to boolean flag which indicates whether external Base T * PHY interrupt is lsc
@@ -2628,7 +2628,7 @@ static int ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up) } /** ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link - * @hw: point to hardware structure + * @hw: pointer to hardware structure * * Configures the link between the integrated KR PHY and the external X557 PHY * The driver will call this function when it gets a link status change
@@ -2745,7 +2745,7 @@ static int ixgbe_led_off_t_x550em(struct ixgbe_hw *hw, u32 led_idx) if (led_idx >= IXGBE_X557_MAX_LED_INDEX) return -EINVAL; - /* To turn on the LED, set mode to ON. */ + /* To turn off the LED, set mode to OFF. */ hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, MDIO_MMD_VEND1, &phy_data); phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK;
@@ -2812,7 +2812,7 @@ int ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw *hw, u8 maj, u8 min, return ret_val; } -/** ixgbe_get_lcd_x550em - Determine lowest common denominator +/** ixgbe_get_lcd_t_x550em - Determine lowest common denominator * @hw: pointer to hardware structure * @lcd_speed: pointer to lowest common link speed *
--
2.50.1