On Wed, Aug 27, 2025 at 04:20:20AM +0300, Dmitry Baryshkov wrote:

On Tue, Aug 26, 2025 at 11:51:01PM +0530, Wasim Nazir wrote:

quoted

From: Monish Chunara <redacted>

Introduce the SDHC v5 controller node for the Lemans platform.
This controller supports either eMMC or SD-card, but only one
can be active at a time. SD-card is the preferred configuration
on Lemans targets, so describe this controller.

Define the SDC interface pins including clk, cmd, and data lines
to enable proper communication with the SDHC controller.

Signed-off-by: Monish Chunara <redacted>
Co-developed-by: Wasim Nazir <redacted>
Signed-off-by: Wasim Nazir <redacted>
---
 arch/arm64/boot/dts/qcom/lemans.dtsi | 70 ++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 99a566b42ef2..a5a3cdba47f3 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi

@@ -3834,6 +3834,36 @@ apss_tpdm2_out: endpoint {
 			};
 		};
 
+		sdhc: mmc@87c4000 {
+			compatible = "qcom,sa8775p-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x087c4000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>;
+			clock-names = "iface", "core";
+
+			interconnects = <&aggre1_noc MASTER_SDC 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDC1 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+
+			iommus = <&apps_smmu 0x0 0x0>;
+			dma-coherent;
+
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			no-sdio;
+			no-mmc;
+			bus-width = <4>;

This is the board configuration, it should be defined in the EVK DTS.

ACK.

quoted

+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			status = "disabled";
+		};

Regards,
Monish