[PATCH net 10/11] net/mlx5e: Update and set Xon/Xoff upon port speed set

From: Alexei Lazar <redacted>

Xon/Xoff sizes are derived from calculations that include
the port speed.
These settings need to be updated and applied whenever the
port speed is changed.
The port speed is typically set after the physical link goes down
and is negotiated as part of the link-up process between the two
connected interfaces.
Xon/Xoff parameters being updated at the point where the new
negotiated speed is established.

Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <redacted>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 15eded36b872..e680673ffb72 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c

@@ -139,6 +139,8 @@ void mlx5e_update_carrier(struct mlx5e_priv *priv)
 	if (up) {
 		netdev_info(priv->netdev, "Link up\n");
 		netif_carrier_on(priv->netdev);
+		mlx5e_port_manual_buffer_config(priv, 0, priv->netdev->mtu,
+						NULL, NULL, NULL);
 	} else {
 		netdev_info(priv->netdev, "Link down\n");
 		netif_carrier_off(priv->netdev);

-- 
2.34.1