Re: 回覆: [net-next v2 0/4] Add AST2600 RGMII delay into ftgmac100

From
Andrew Lunn <andrew@lunn.ch>
Date
2025-08-20 02:44:00
Also in
linux-arm-kernel, linux-aspeed, linux-devicetree, lkml
Reply to
Jacky Chou, 2025-08-20
On Wed, Aug 20, 2025 at 12:40:02AM +0000, Jacky Chou wrote:
Hi Andrew,

Thank you for your reply.
quoted
quoted
This patch series adds support for configuring RGMII internal delays
for the Aspeed AST2600 FTGMAC100 Ethernet MACs.
So i think you are doing things in the wrong order. You first need to sort out the
mess of most, if not all, AST2600 have the wrong phy-mode, because the
RGMII delay configuration is hidden, and set wrongly.

Please fix that first.
The RGMII delay is configured in U-boot stage, and it is not changed when booting to
Linux. I want to know whether the first thing to correct here is whether the phy-mode
in aspeed-ast2600-evb.dts is rgmii-id. Our AST2600 EVB, there is no delay on board,
so, I need to change the phy-mode to "rgmii-id" to meet the RGMII usage first?
If there is no delay on the PCB, then phy-mode is "rgmii-id".

	Andrew
Thread (15 messages) 15 messages, 3 authors, last reply 2025-08-26
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help